SuperFish Preset Mini Heater
10 W - 25 W
User manual
Gebrauchsanweisung
Mode d'Emploi
Gebruiksaanwijzing
Brugervejledning
Manuale d'uso
Function
The Preset Mini Heater is a small aquarium heater with a thermostat set to a fixed temperature of 26°C. Tropical fish live in warm water at around 26°C, and this underwater heater will heat the aquarium water to this desired constant temperature.
Installation
- Install the heater with the suction cups in the aquarium.
- Install the heater completely submerged. The maximum operating depth is 1 metre. The heater switches off automatically when not fully submerged.
- Allow the thermostat of the heater to acclimate for about 5 minutes with the water temperature.
- Turn on the heater by plugging it into the socket. Ensure that no water can get close to the socket.
- Always check the water temperature with an aquarium thermometer. Even though the heater has a temperature accuracy of ± 0.5°C, small deviations are always possible.
Maintenance
Clean the heater regularly. If lime scale accumulates, clean with a descaling agent. After cleaning, rinse the heater thoroughly with clean tap water.
Technical Specifications
Preset Mini Heater | 10W | 25W |
---|---|---|
Power | 10 Watt | 25 Watt |
Voltage | 5 Volt | 12 Volt |
Aquarium | 0-10 L | 0-25 L |
Diagrams
The diagrams illustrate correct and incorrect installation of the heater. The correct installation shows the heater fully submerged in the aquarium with a checkmark (✔️). The incorrect installation shows the heater partially submerged above the water line with a cross (❌).
Manufacturer Information
Produced in China for: Aquadistri, Vlietweg 8, 4791 EZ Klundert, NL. Visit www.aquadistri.com for more information.