Häfele 105° Inset Clip-On Hinge
Product Code: 9329184 001971
Quantity: 2 PCS
Drilling Instructions
Hinge Cup (Door)
Detailed drilling dimensions for the hinge cup in the door:
- Cup Diameter: 35mm
- Depth from door edge to cup center: 6mm
- Distance from door edge to cup edge: 12mm
Diagram Description: A circular cut-out (hinge cup) is shown on the edge of a cabinet door. Dimensions indicate the cup's diameter (35mm), its depth from the door's front edge (6mm), and the distance from the door's front edge to the center of the cup (12mm).
Mount Plate (Cabinet Side)
Detailed drilling dimensions for the mounting plate on the cabinet side:
- Distance from cabinet side edge to screw hole center: 37mm
- Distance between screw hole centers: 32mm
Diagram Description: A rectangular mounting plate is shown, designed to be fixed to the cabinet side. Key dimensions indicate the placement of screw holes relative to the cabinet edge (37mm) and the spacing between the two screw holes (32mm).
Mounting Instructions
Diagram Description: The hinge arm is shown being attached to the mounting plate. The process involves aligning two points on the hinge arm with corresponding points on the mounting plate and then applying light pressure to clip them together.
Step 1: Align the hinge arm with the mounting plate.
Step 2: Join the two points marked by an arrow.
Step 3: Apply light pressure to secure the clip-on mechanism.
Adjusting the Door
Depth Adjustment
With Häfele mounting plates featuring a quick fixing system, depth adjustment of the door is possible from -0.6 mm up to +3 mm using an eccentric screw. This adjustment can be made without loosening other screws.
Diagram Description: An eccentric screw mechanism on the mounting plate is shown. Arrows indicate the adjustment range from -0.6mm to +3mm, demonstrating how turning the screw alters the door's depth.
Height Adjustment
Height adjustment of the door by ±2 mm is achievable by loosening the two fixing screws on the mounting plate. The slots in the plate allow it to slide in both directions for adjustment. After adjustment, the screws must be re-tightened.
Diagram Description: A mounting plate with slotted holes is depicted. Loosening the screws allows the plate to move vertically within the slots, enabling height adjustment of the door. The adjustment range is shown as ±2 mm.
Lateral Adjustment
Lateral adjustment of the door is performed using an adjusting screw on the hinge arm. This screw allows for a lateral travel range of -2 mm up to +2 mm.
Diagram Description: The hinge arm is shown with a specific screw designated for lateral adjustment. Turning this screw moves the hinge arm sideways, providing a range of ±2 mm for aligning the door horizontally.
Technical Specifications & Usage Guidelines
Hinge Selection Chart
The following chart indicates the recommended number of hinges based on door weight, door height, and a standard door width of 600mm, assuming an 18mm door thickness.
| Door Height (mm) | 4-9 kg | 9-12 kg | 12-18 kg | 17-22 kg |
|---|---|---|---|---|
| 500 | 2 | 3 | 3 | 4 |
| 1000 | 3 | 3 | 4 | 4 |
| 1500 | 3 | 4 | 4 | 4 |
| 2000 | 4 | 4 | 4 | 4 |
| 2500 | 4 | 4 | 4 | 4 |
Tools Required
- 35mm Ø Drill Bit & Template Kit
- 2mm Ø Drill Bit
- Pencil
- Power Drill
- No. 2 Pozidrive Screwdriver / Screw Bit
Screw Fixing
The hinge cup is fixed using screws with a countersunk head.
Diagram Description: Illustrates the hinge cup being secured to the door with countersunk screws. Dimensions provided: 48mm (distance from door edge to center of cup), 35mm (cup diameter), 6mm (depth from door edge to cup), and 14mm (distance between screw holes).
Origin: MADE IN CHINA
Article Number: 483.02.430
