TECWERK LED Spotlight 50 W with Stand

Article Number: 2000 873 344

Product Overview

This manual provides essential information for the safe and optimal use of the TECWERK LED Spotlight 50 W with Stand. Please read the entire manual carefully and keep it for future reference.

[Image: A blue metal-framed LED spotlight with a large white LED panel, a black padded handle, and a sturdy stand with two wheels.]

Safety Instructions

ℹ️ This manual is an integral part of the product. It contains important notes on operation and handling. Please include the manual with the product if it is passed on to a third party!

⚠️ Do not leave packaging material lying around carelessly. Plastic bags and other packaging elements can become dangerous toys for children.

⚠️ Keep the appliance out of the reach of children. It is not a toy.

⚠️ Before every use, check the products for damage!

⚠️ Do not look directly into the LEDs and do not direct the light beam directly towards the eyes of people or animals.

⚠️ Do not use optical instruments with strong focusing effects to view the light beam.

⚠️ If the appliance is damaged, it must not be used further and must be repaired by a qualified specialist.

⚠️ Disconnect the appliance from the power supply when not in use or when cleaning it (e.g., unplug the power cord, switch off the circuit breaker, etc.).

⚠️ Do not expose the LED spotlight to extreme temperatures, strong magnetic fields, or strong vibrations.

⚠️ Do not use the LED spotlight in rooms or in unfavorable ambient conditions where flammable gases, vapors, or dust may be present. This poses a risk of explosion.

⚠️ Do not immerse any part of the LED spotlight in liquids of any kind.

⚠️ Position the power cord so that it does not pose a hazard (e.g., tripping hazard). When laying the power cord, do not bend it too much, pinch it, or stretch it excessively.

⚠️ Replace a defective glass immediately.

1.0m Please note that there must be a distance of at least 1 meter between the front of the LED spotlight and other objects.

✅ Mount the LED spotlight only on normally or difficult-to-flame surfaces.

✅ Always set up the lamp stably on a suitable surface.

⚠️ Never cover the LED spotlight during operation.

⚠️ The appliance is not designed for operation at altitudes above 2000 meters.

⚠️ The products included in the scope of delivery must not be modified or converted.

⚠️ The LED spotlight must only be used with a proper power socket (230V~/50Hz).

⚠️ Handle the product with care. Avoid shocks, impacts, or drops from a low height. The product could be damaged.

⚠️ Do not disassemble the appliance or attempt any repairs or modifications. The appliance does not contain any parts that you can replace or repair yourself. For questions or problems, please contact customer service.

⚠️ If operated outdoors, ensure the power cord does not pose a tripping hazard. Ensure that rainwater cannot penetrate the housing or socket.

⚠️ When used outdoors, the LED spotlight must be operated with a residual-current device (RCD/FI switch).

[Diagram showing the components of the LED spotlight: 1. Power Plug, 2. Tempered Glass, 3. LED Light Panel, 4. Foldable Stand.]

Intended Use

The LED spotlight is intended for temporary illumination. It is suitable for outdoor use and can be exposed to rain (IP 65).

Maintenance and Storage

Do not use aggressive chemicals, solvents, or abrasive cleaners for cleaning the lamp. Do not allow any liquids of any kind to penetrate the lamp, and do not immerse the lamp in liquids of any nature. Store the lamp in a location protected from direct sunlight, dust, humidity, extreme temperatures, and vibrations, and keep it out of the reach of children.

Technical Data

Specification	Details
Operating Voltage	230 V~ 50 Hz
Housing Material	Aluminum and tempered glass, plastic
Light Source	50 W LED Panel white
LED Panel Illumination	4250 lm
Color Temperature	6500 K
Ra Value	> 80
Average Lifespan	30,000 h
Degree of Protection	IP65
Dimensions	330 x 359 x 73 mm
Cable Length	5 m H07RN-F 3x1
Weight	2300 g

Disposal Information

[Symbol indicating that packaging, batteries, and electrical devices should not be disposed of with household waste.]

As the owner, you are legally obligated to separate these materials from unsorted municipal waste and deliver them to the appropriate recycling collection sites. Alternatively, you can also return them to the location where you purchased the product.

Declaration of Conformity

NORDWEST Handel AG declares in sole responsibility that the article LED Spotlight 50 W with Stand, article number 2000 873 344, complies with the essential requirements of the following directives and regulations: 2011/65/EU, 2014/30/EU, 2014/35/EU, 2009/125/EG.

A complete declaration of conformity can be downloaded from this internet address: https://download.nordwest.com/datasheets/

	TECWERK LED Spotlight 50W User Manual and Safety Guide Comprehensive user manual for the TECWERK LED Spotlight 50W (Art.-No. 2000 873 341), covering installation, operation, safety precautions, maintenance, technical specifications, and disposal information. Includes multilingual safety guidance.
	TECWERK LED Inspection Light User Manual Comprehensive user manual for the TECWERK LED Inspection Light (Art. No. 2000 877 190), covering safety instructions, product warranty, technical specifications, and operating procedures.
	TECWERK High Power LED Flashlight User Manual and Specifications Comprehensive user manual for the TECWERK High Power LED Flashlight (Art. No. 2000 877 188), including safety instructions, technical specifications, operating procedures, and warranty information.
	TECWERK Machinist's Calipers User Manual Comprehensive user manual for TECWERK Machinist's Calipers, covering operation, features, troubleshooting, and technical specifications for 300mm, 500mm, and 800mm models.
	TECWERK Spiralbohrer Schnittgeschwindigkeitsempfehlungen Detaillierte Empfehlungen für Schnittgeschwindigkeiten (Vc) und Kühlmethoden für TECWERK Kurzspiralbohrer bei verschiedenen Materialien wie Stahl, rostfreiem Stahl, Gusseisen und Nichteisenmetallen.
	Application Recommendations for Machining Materials Detailed table of application recommendations and cutting parameters for various materials including steels, cast iron, non-ferrous metals, and superalloys, specifying speed and cooling methods.
	Application Recommendations for Machining Materials Technical guide providing application recommendations for machining various materials, including steel, stainless steel, cast iron, non-ferrous metals, and tempered steel. Details recommended cutting speeds (Vc) and cooling methods for different material grades and hardness levels.
	TECWERK Machining Recommendations: Cutting Speeds and Cooling A technical data table from TECWERK providing recommended cutting speeds (Vc) and cooling methods for various materials, including different types of steel, cast iron, non-ferrous metals, and superalloys. The table specifies parameters based on tensile strength and material grades.