TECWERK LED Spotlight 50W

Introduction

This manual provides essential information for the optimal use and safe operation of your TECWERK LED Spotlight 50W. Please read this manual thoroughly and keep it for future reference. It is recommended to pass this manual along with the product if it is transferred to a third party.

Product Identification

Product Name: LED Spotlight 50W

Article Number: 2000 873 341

Brand: TECWERK

Safety Instructions

To prevent malfunctions, damage, and health impairments, please observe the following safety instructions:

• Keep packaging materials away from children, as plastic bags can be a choking hazard or become dangerous toys.
• Keep the unit out of the reach of children. It is not a toy.
• Always check the product for damage before each use.
• Do not stare directly into the LED light panel or direct the light beam towards people or animals.
• Do not use optical instruments that strongly focus light to view the light beam.
• If the unit is damaged, do not use it further. Repair work must be carried out by a qualified service technician.
• Disconnect the unit from the power supply when it is not in use or when cleaning it (e.g., unplug the power cord, switch off the circuit breaker).
• Do not expose the LED spotlight to extreme temperatures, strong magnetic fields, or strong vibrations.
• Do not use the product in rooms or in unfavorable ambient conditions where flammable gases, vapors, or explosive dust may be present. This poses a risk of explosion.
• Do not immerse any components of the LED spotlight in liquids of any kind.
• Position the power cord securely to prevent tripping hazards. Avoid kinking, pinching, or stretching the cord excessively.
• Immediately replace any broken glass.
• Ensure a minimum distance of 1.0 meter (approx. 3.3 feet) between the front of the LED spotlight and other objects.
• Mount the lamp only on normally flammable or flame-resistant surfaces.
• Never cover the product when it is in use.
• The product is not intended for operation at altitudes exceeding 2000 meters.
• The products included in the delivery must not be altered or modified.
• The LED spotlight must only be connected to a properly rated power socket (230V~/50Hz).
• Handle the product with care. Avoid mechanical shock, impact, or dropping it from any height, as this may cause damage.

Intended Use

The TECWERK LED Spotlight 50W is designed for illuminating house entrances, driveways, yards, and similar outdoor areas. It is suitable for outdoor installation and is protected against rain (IP 65).

The product must not be modified or converted in any way.

Preparations for Installation

• Always observe the safety instructions.
• Pay close attention to the correct mounting position of the LED spotlight and the power cable.
• For outdoor installations, ensure the power cable is routed to prevent rainwater from entering the housing or the connection socket.
• Mount the LED spotlight only on a stable surface. Use screws and plugs appropriate for the mounting surface.
• For outdoor use, the LED spotlight must be operated with a residual current device (FI protective switch).

Mounting and Installation

1. Secure the wall mount firmly to a suitable wall using two or three screws.

2. Tilt the LED spotlight to the desired angle and tighten the screws at the hinge to secure its position.

3. Connect the power plug of the LED spotlight to a suitable wall socket.

Maintenance and Storage

For cleaning the lamp, do not use aggressive chemicals, solvents, or abrasive materials. Do not allow any liquids to penetrate the lamp, and do not immerse the lamp in liquids of any kind. Store the lamp in a location protected from direct sunlight, dust, humidity, extreme temperatures, and vibrations, and keep it out of the reach of children.

Technical Data

Disposal Information

Packaging materials, batteries, and electrical devices should not be disposed of with household waste. As the owner, you are legally obligated to separate these materials from unsorted municipal waste and deliver them to the appropriate recycling collection points. Alternatively, you can return them to the location where you purchased the product.

Declaration of Conformity

The NORDWEST Handel AG declares in sole responsibility that the article LED Spotlight 50 W, article number 2000 873 341 complies with the essential requirements of the following directives and regulations: 2011/65/EU, 2014/30/EU, 2014/35/EU, 2009/125/EG.

A complete declaration of conformity can be downloaded from this internet address: https://download.nordwest.com/datasheets/