ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Einsatzempfehlung

Material	Tensile Strength (N/mm²)	Steel		Stainless Steel		Cast Iron		Non-ferrous Metals			Tempered Steel		Cooling
Material	Tensile Strength (N/mm²)	<1200 (HRC38)	<1600 (HRC48)	<800	<1200	GG	GGG	Al Knetleg	Al Si-10%	Ca Ms	HRC 48-57	HRC 58-63	Cooling
2000 861 202-	60-80	50-70	30-40	20-30	10-20	80-90	70-80	200	120-150	50-180	12-15	8-12	Emulsion
2000 861 252-	70-100	60-90	50-70	25-40	15-20	120-160	95-120	200	140-170	45-210	15-25	10-20	Emulsion/Ol

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 2 Pages, 31.76KB

Schnittdaten 2000861202 all GPL Ghostscript 10.00.0

Related Documents

	TECWERK Cutting Speed and Cooling Recommendations for Machining This document provides essential cutting speed (Vc) and cooling recommendations for machining various materials, including steels, stainless steels, non-ferrous metals, cast iron, aluminum alloys, and hardened steels. It lists recommended Vc values in m/min and cooling methods (Emulsion, Emulsion/Öl) based on material type and tensile strength where applicable. The data is provided by TECWERK for their drilling products.
	TECWERK NC Counterbore Application Recommendations and Cutting Data This document provides application recommendations and cutting data for TECWERK NC counterbores, detailing recommended cutting speeds (Vc) and cooling methods for various materials including different grades of steel, stainless steel, cast iron, non-ferrous metals, and hardened steel.
	TECWERK Machining Recommendations: Cutting Speeds and Cooling A technical data table from TECWERK providing recommended cutting speeds (Vc) and cooling methods for various materials, including different types of steel, cast iron, non-ferrous metals, and superalloys. The table specifies parameters based on tensile strength and material grades.
	TECWERK Cutting Recommendations for NC Countersinks Application recommendation table for TECWERK NC countersinks, providing cutting speed (Vc) and cooling guidelines for various materials including steel, stainless steel, cast iron, non-ferrous metals, sintered parts, and hardened steel. Includes material tensile strength data.
	Application Recommendations for Machining Materials Detailed table of application recommendations and cutting parameters for various materials including steels, cast iron, non-ferrous metals, and superalloys, specifying speed and cooling methods.
	TECWERK Cutting Tool Application Recommendations - Material and Machining Data Detailed application recommendations from TECWERK for cutting tools, providing tensile strength, cutting speed (Vc), and cooling methods for various materials including steel, stainless steel, non-ferrous metals, and hardened steel. Includes specific data for product 2000 862 279-.
	TECWERK Countersink Cutting Data and Application Recommendations Comprehensive cutting data and application recommendations for TECWERK countersinks, detailing parameters for various materials including steel, stainless steel, and non-ferrous metals. Includes guidance on tensile strength, cutting speed (Vc), and cooling methods.
	TECWERK Drill Bit Cutting Data and Application Recommendations Comprehensive cutting data and application recommendations for TECWERK HSS cylindrical shank drill bits, DIN 1869 Type TS. Includes material compatibility, tensile strength, hardness ranges, product codes, cutting speeds (Vc), and cooling methods.