HOMCOM 835-835V00/835-835V70 Dining Chair Set of 4 Assembly Instructions
Model Numbers: 835-835V00, 835-835V70
This document contains important information regarding the assembly, use, maintenance, and storage of your HOMCOM dining chairs. Please read carefully and retain for future reference.
General Information
Important: Retain for future reference. Read carefully.
This product is intended for domestic use only.
Instructions for Use:
- Place the chair stably on a flat floor.
- Stay away from open flames.
- Avoid overloading the chair.
Precautions Before Assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions:
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Assembly Warnings:
- Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to bad installation or withering. If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Parts List
The following parts are included in your set:
- Part 1: Chair Back (x4)
- Part 2: Front Legs (x4)
- Part 3: Rear Legs (x4)
- Part 4: Support Bar (x4)
- Part 5: Seat Base (x4)
Hardware List
The following hardware is included:
- Hardware A: M6*13 screws (x16 + 1 spare)
- Hardware B: M6*40 screws (x8 + 1 spare)
- Hardware C: M4*42 screws (x16 + 1 spare)
- Hardware D: Allen Wrench (x1)
Assembly Steps
Follow these steps to assemble your chairs:
Step 01:
Attach the chair back (1) to the seat base (5) using four M6*13 screws (A). Repeat for all four chairs.
Step 02:
Attach the front legs (2) and rear legs (3) to the seat base (5) using two M6*40 screws (B) per leg. Repeat for all four chairs.
Step 03:
Attach the support bars (4) to the legs using four M4*42 screws (C) per bar. Ensure all screws are tightened securely. Repeat for all four chairs.
Step 04: (Final Adjustment)
Adjust the four feet to ensure the chair is level. Then, tighten all screws.
Your HOMCOM dining chairs are now assembled!
Customer Support Information
If you have any questions, please contact the customer care center for your region:
- US: 001-877-644-9366, customerservice@aosom.com
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- CA: 416-792-6088, customerservice@aosom.ca
- DE: 0049-0(40)-88307530, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
- ES: 0034-931294512, atencioncliente@aosom.es
- PT: 0034-931294512, info@aosom.pt
- FR: 0033-1-84166106, aosom@mhfrance.fr
Imported by: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
Recycling Information: Please dispose of packaging responsibly. Addresses for waste disposal services can be found at quefairedemesdechets.fr.
