HOMCOM Accent Chair
Model Numbers: IN230800495V01_GL, 835-354, 835-354V70, 835-354V80
Important Information
Please read these instructions carefully and retain them for future reference. This product is intended for domestic use only.
Usage Instructions
- Place the chair stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the parts are missing.
Maintenance and Storage
- Clean the chair with a soft fabric.
- Regularly check the seating and structure.
- Store fabric parts in a dry, clean environment to prevent mold.
Safety Warnings
Assembly Hazards: Be aware of crushing and cutting hazards during assembly.
Installation: The manufacturer is not responsible for damages caused by improper installation or environmental factors.
Adjustments: Replacement or repair of components for height adjustment, especially those with energy storage systems, must only be performed by qualified personnel.
Electrical Safety:
- This appliance can be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities or lack of experience, provided they are supervised or instructed on safe use and understand the associated hazards.
- Children should not play with the appliance.
- Cleaning and user maintenance should not be performed by children without supervision.
- Use the appliance only with the provided power supply unit.
- The external flexible cable or cord of the transformer cannot be replaced; if damaged, the transformer must be scrapped.
- If the appliance has a heated surface, persons insensitive to heat should exercise caution.
- Do not use the power supply unit if the plug pins are damaged. [!]
Assembly Instructions
Parts Included:
- Part A: Chair Seat and Back
- Part B: Gas Lift Cylinder
- Part C: Chair Base
Step 01: Insert the gas lift cylinder (B) into the center of the chair base (C). Then, place the chair seat and back (A) onto the top of the gas lift cylinder (B).
Step 02: Ensure the chair is securely attached to the gas lift cylinder and the base. The chair is now assembled.
Contact Information & Recycling
For any questions or assistance, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 416-792-6088, customerservice@aosom.ca
- DE: 0049-0(40)-87408465, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
- ES: 0034-931294512, atencioncliente@aosom.es
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- FR: 0033-1-84166106, aosom@mhfrance.fr
Please recycle this product responsibly. [♻️]
