HOMCOM Armchair

Welcome and Important Information

Thank you for purchasing this HOMCOM product. This manual provides essential information for assembly, use, and maintenance to ensure your appliance serves you well. Please read all instructions carefully before proceeding.

IMPORTANT: Retain this document for future reference. Read carefully.

Safety and General Warnings

• For domestic use only.
• Place the chair stably on a flat floor.
• Keep away from open flames and heat sources.
• Avoid overloading the chair.
• Beware of crushing and cutting hazards during assembly. ⚠️
• The manufacturer is not responsible for damages due to improper installation or environmental factors.
• If the seat is equipped with powered seat height adjustments, only trained personnel may replace or repair those components.

Precautions Before Assembly

• Prepare a clean and dry assembly area.
• Ensure the product is not damaged before starting.
• Verify that all parts and hardware are present.

Maintenance

• Clean with a soft fabric.
• Regularly remove any leaves or water collected on the fabric.
• Check the seating regularly for looseness or damage.

Storage Conditions

• The fabric should be stored completely dry in a clean and dry place to avoid mold risks.

Parts List

Identify all parts before assembly:

• Part A: Seat Cushion (x1)
• Part B: Backrest Cushion (x1)
• Part C: Side Frame components (x1 set, labeled L and R in diagrams)
• Part J: Base Support Bar (x1)

Hardware List

Identify all hardware before assembly:

• Hardware D: Bolt M6*45 (x8 + 1 spare)
• Hardware E: Washer (x2 + 1 spare)
• Hardware F: Nut (x2 + 1 spare)
• Hardware G: Bolt (x8 + 1 spare)
• Hardware H: Allen Wrench (x1) ?
• Hardware I: Screw Cap (x2 + 1 spare)

Assembly Instructions

Important Note: Do not fully tighten bolts until all parts are connected. ⚠️

Step 01: Preparation

Lay out all parts and hardware. The diagram shows parts A (seat cushion), B (backrest cushion), C (side frames, labeled L and R), and J (base support bar), along with hardware D, E, F, G, H, and I.

Step 02: Attach Left Side Frame to Seat

Connect the left side frame (part of C) to the seat cushion (Part A). Use hardware D (bolts) and H (Allen wrench). The diagram shows a close-up of this connection, indicating correct alignment. Visual cues suggest checking connections with indicators like '70%' and '100%'. ✔️

Step 03: Attach Right Side Frame and Base Support

Connect the right side frame (part of C) to the seat cushion (Part A) using hardware D and H. Then, attach the base support bar (Part J) to both side frames using hardware D and H. The diagrams provide close-ups of these connections.

Step 04: Attach Backrest

Attach the backrest cushion (Part B) to the assembled frame. Use hardware G (bolts). The diagram shows the backrest being secured to the seat and side frames. The indicator 'OK' and '100%' suggest final tightening and completion. ?

Assembly Complete

Your HOMCOM armchair is now assembled. The 'Done' indicator confirms completion. ✅

Customer Support and Contact Information

For any questions or assistance, please contact our customer care center. Contact details by country:

Importer Information

This product is imported and distributed by various entities. Please refer to the details below for your region.

United States: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.

Canada: Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.

France: Imported by Aosom Canada Inc. (address in Canada). Also address for MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Fabriqué en Chine.

United Kingdom: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.

Spain: Importador: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. www.aosom.es. Hecho en China.

Portugal: SPANISH AOSOM, S.L., C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. www.aosom.pt. Hecho en China.

Germany: Adresse des Importeurs: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. In China hergestellt.

Italy: Importato da: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. Fatto in Cina.

Recycling information: Think about donating or recycling. ♻️ Association | Magazine | Déchèterie. https://quefairedemesdechets.fr