Important Information
Retain for future reference. Read carefully.
Only for domestic use.
Estimated assembly time: 20 minutes. Number of steps: 3.
Instructions for Use
- Place the chair stably on a flat floor.
- Stay away from open flames.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation or environmental factors.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
Electrical Parts Warning
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The appliance is only to be used with the power supply unit provided with the appliance.
The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped. [Warning: Damaged power cord/plug]
If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
The power supply unit shall not be used if pins of the plug part are damaged.
Assembly Steps
Step 1: Prepare the Chair Legs
Identify Part B (x1), which consists of two separate leg frames. Align the two leg frames of Part B as indicated in the diagram.
Step 2: Attach First Leg Assembly to Seat
Take Part A (the chair seat). Align the prepared leg assembly (Part B) with the underside of the seat. Secure it using four M6*45 screws (Part C) and five washers (Part E). Tighten using the Allen key (Part H).
Step 3: Attach Second Leg Assembly to Seat
Align the second leg assembly (Part B) with the underside of the seat. Secure it using four M6*60 screws (Part D) and five washers (Part E). Tighten using the Allen key (Part H).
Step 4: Install Support Brackets
Attach the four support brackets (Part F) to the leg structure using the provided hardware. This step reinforces the leg assembly.
Step 5: Final Check
Ensure all screws are fully tightened and the chair is stable. The assembly is now complete.
Contact Information
United States
Customer Care Center: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA
Made in China
Canada
Customer Care Center: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
Made in China
United Kingdom
Customer Care Center: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
Made in China
France
Customer Care Center: 0033-1-84166106
Email: aosom@mhfrance.fr
Imported by: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France
Made in China
Germany
Kundendienstzentrum: +49 4087408465
Email: service@aosom.de
Address of Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
Made in China
Italy
Centro Assistenza Clienti: 0039-0249471447
Email: clienti@aosom.it
Importato da/Produttore/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
Made in China
Spain
Centro de Atención al Cliente: 0034-931294512
Email: atencioncliente@aosom.es
Importador/Fabricante/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
Made in China
Portugal
Centro de Atendimento ao Cliente: 0034-931294512
Email: info@aosom.pt
Importador/Fabricante/REP: SPANISH AOSOM, S.L., C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ
Feito na China
Recycling information: Addresses sur quefairedemesdechets.fr
