HOMCOM 833-523 Reclining Chair

Important Information

IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

This product is intended for domestic use only.

Instructions for Use

• Place the chair stably on a flat floor.
• Keep away from open flames and heat sources.
• Avoid overloading the chair.

Precautions Before Assembly

• Prepare a clean and dry assembly area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance

• Clean the chair with a soft fabric.
• Regularly check the seating and structure.

Storage Conditions

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Assembly Safety Warnings

Be aware of crushing and cutting hazards during assembly. The manufacturer is not responsible for damages caused by improper installation or environmental factors.

Warning: Replacement or repair of components for height adjustment of seating furniture with energy storage must only be performed by qualified personnel.

Electrical Safety Information

This appliance can be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning the safe use of the appliance and understand the associated hazards.

• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be performed by children without supervision.
• The appliance must only be used with the provided power supply unit.
• The external flexible cable or cord of the transformer cannot be replaced; if the cord is damaged, the transformer must be scrapped.
• If the appliance has a heated surface, persons insensitive to heat must exercise caution when using it.
• Do not use the power supply unit if the plug pins are damaged.

Assembly Guide

Parts Identification

The product consists of two main components:

• Part (1): [Chair backrest component] (Quantity: 1)
• Part (2): [Chair base/seat component] (Quantity: 1)

Step 01: Connecting Components

Align Part (1) with the designated connection points on Part (2). Insert the connecting mechanism as shown by the downward arrow [⬇️]. Secure the connection, potentially through a locking action indicated by the curved arrow [↩️].

Step 02: Reclining Operation

The chair is designed to recline. Arrows [➡️] indicate the movement of the backrest backward and the extension of the footrest forward. The assembly process is completed ("Done") after this step.