Mitsubishi Electric MSZ-GL06NA Indoor Unit Submittal Data
6,000 BTU/H Wall-Mounted Indoor Unit for MXZ-C Multi-Zone Heat Pump Systems
General Features
- Slim wall-mounted indoor units provide zone comfort control.
- The outdoor unit powers the indoor unit, and should a power outage occur, the system automatically restarts when power returns.
- Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto.
- Multiple control options available: Hand-held Remote Controller (provided with unit), kumo cloud® smart device app for remote access, Third-party interface options, Wired or wireless controllers.
- Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle.
- Quiet operation.
- Smart Set: recalls a preferred preset temperature setting at the touch of a button.
Specifications: MSZ-GL06NA
| Specification | Value |
|---|---|
| Cooling Capacity | 6,000 BTU/H |
| Heating Capacity | 7,200 BTU/H |
| Voltage, Phase, Frequency | 208/230V, 1 phase, 60Hz |
| Guaranteed Voltage Range | 187-253 V AC |
| Voltage: Indoor - Outdoor, S1-S2 | 208/230 V AC |
| Voltage: Indoor - Outdoor, S2-S3 | 24 V DC |
| Short-circuit Current Rating (SCCR) | Wireless Type |
| MCA | 1 A |
| Blower Motor Full Load Amperage | 0.76 A |
| Blower Motor Output | 30 W |
| Airflow Rate at Cooling, Dry | 145-170-237-321-399 CFM |
| Airflow Rate at Cooling, Wet | 109-134-201-286-364 CFM |
| Airflow Rate at Heating, Dry | 145-170-237-321-406 CFM |
| Sound Pressure Level (Cooling) | 19-22-30-37-43 dB(A) |
| Sound Pressure Level (Heating) | 19-22-30-37-43 dB(A) |
| Drain Pipe Size | 5/8 (15.88) In. (mm) |
| Heat Exchanger Type | Plate fin coil |
| External Finish Color | Munsell 1.0Υ 9.2/0.2 |
| Unit Dimensions (W x H x D) | 31-7/16 (798) x 11-5/8 (295) x 9-1/8 (232) In. (mm) |
| Package Dimensions (W x H x D) | 33-1/2 (850) x 14 (350) x 12 (300) In. (mm) |
| Unit Weight | 22 (10) Lbs. (kg) |
| Package Weight | 26 (11.5) Lbs. (kg) |
| Refrigerant Type | R410A |
| Piping Gas Pipe Size O.D. (Flared) | 3/8 (9.52) In. (mm) |
| Piping Liquid Pipe Size O.D. (Flared) | 1/4 (6.35) In. (mm) |
Accessories: MSZ-GL06NA
| Accessory | Model Number |
|---|---|
| Anti-allergy Enzyme Filter | MAC-408FT-E |
| kumo touch ™™ RedLINK TM Wireless Controller | MHK2 |
| Deluxe MA Remote Controller¹ | PAR-40MAAU |
| Simple MA Controller¹ | PAC-YT53CRAU-J |
| Touch MA Controller¹ | PAR-CT01MAU-SB |
| Wired Remote Sensor | M21-EAA-307 |
| Wireless Temperature and Humidity Sensor | PAC-USWHS003-TH-1 |
| System Control Interface² | MAC-334IF-E |
| Wireless Interface 2 | PAC-USWHS002-WF-2 |
| Thermostat Interface | PAC-US444CN-1 |
| kumo station® | PAC-WHS01HC-E |
| USNAP Interface | PAC-WHS01UP-E |
| IT Extender | PAC-WHS01IE-E |
| BACnet® and MODBUS® Interface | PAC-UKPRC001-CN-1 |
| Lockdown Bracket for Hand-held Remote Controllers | RCMKP1CB |
| Blue Diamond Sensor Extension Cable - 15 Ft. | C13-103 |
| Blue Diamond Alarm Extension Cable - 6.5 Ft. | C13-192 |
| Blue Diamond MultiTank - collection tank for use with multiple pumps | C21-014 |
| Blue Diamond Rubber Foot Pads | F10-010 |
| Mini Condensate Pump - 230 volt application | S130-230 |
| MegaBlue Advanced Blue Diamond Condensate Pump w/ Reservoir & Sensor | X87-835- 110 to 250V |
| MaxiBlue Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (110V) up to 48,000 BTU/H [recommended] | X87-711- 110V |
| Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended] | X87-721- 208/230V |
| MicroBlue Blue Diamond Mini Condensate Pump (110/208/230V) up to 18,000 BTU/H | X85-003 |
| Fascia Kit for MicroBlue Pump - mounts the MicroBlue and sensor directly beneath the indoor unit | T18-016 |
| Drain Pan Level Sensor | SS610E |
| (30A/600V/UL) [fits 2" X 4" utility box] - Black | TAZ-MS303 |
| (30A/600V/UL) [fits 2" X 4" utility box] - White | TAZ-MS303W |
¹ Requires MAC-334IF-E
² Allows indoor units to connect to an MA Controller
Dimensions: MSZ-GL06NA (Unit: Inch)
Indoor Unit:
- Width: 31-7/16
- Height: 11-5/8
- Depth: 9-1/8
Piping:
- Liquid line: Ø1/4 (6.35) (Flared connection Ø1/4)
- Gas line: Ø3/8 (9.52) (Flared connection: Ø3/8 (06/09/12 KBTU/H), Ø1/2 (15 KBTU/H))
- Insulation: Ø1-1/8 O.D Connected part Ø5/8 O.D
Air Outlet:
- Dimensions provided in diagrams.
Air Inlet:
- Dimensions provided in diagrams.
Installation Plate:
- Oblong holes: 7/16 x 1, 7/16 x 13/16
- Installation plate dimensions: 3-1/8
