Mitsubishi Electric HVAC Systems

General Features

• Slim wall-mounted indoor units provide zone comfort control
• Dual Barrier Coating applied to the heat exchanger, vanes and fan to prevent hydrophilic and hydrophobic dirt build-up
• Optional Microparticle Filter designed to capture PM2.5
• The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
• Quiet operation
• Smart Set: recalls a preferred preset temperature setting at the touch of a button
• Built-in backup/auxiliary heater control available
• Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto
• Multiple control options available:
  • Back-lit screen handheld remote controller (provided with the unit)
  • kumo cloud® smart device app for remote access
  • Third-party interface options
  • Wired or wireless controllers

Specifications

¹Capacity varies based on the number of indoor units operating and the model of the Multi-zone Outdoor Unit. For reference to connected capacity charts, please refer Multi-zone Outdoor Unit Operational Performance.

Dimensions

The MSZ-GS12NA indoor unit is a slim wall-mounted unit. Key dimensions include a width of approximately 31-7/16 inches, depth of 9-1/8 inches, and height of 11-5/8 inches. The unit features an air intake at the top and an air outlet at the front. Piping connections, including gas and liquid lines, and a drain hose, are located on the side. The installation plate has dimensions of 31-7/16 inches width and 3-1/8 inches height, with specific mounting hole configurations. The wireless remote controller is compact, with dimensions of approximately 7-5/8 inches width and 2-3/8 inches height.

Accessories

^†Requires MAC-334IF-E

M-Series EZ FIT® Recessed Ceiling Cassette, Floor-mount and Wall-mount units allow indoor units to connect to an MA Controller: Deluxe MA Remote Controller, Simple MA Controller, Touch MA Controller.

General Features

• Slim wall-mounted indoor units provide zone comfort control
• Dual Barrier Coating applied to the heat exchanger, vanes and fan to prevent hydrophilic and hydrophobic dirt build-up
• Optional Microparticle Filter designed to capture PM2.5
• The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
• Quiet operation
• Smart Set: recalls a preferred preset temperature setting at the touch of a button
• Built-in backup/auxiliary heater control available
• Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto
• Multiple control options available:
  • Back-lit screen handheld remote controller (provided with the unit)
  • kumo cloud® smart device app for remote access
  • Third-party interface options
  • Wired or wireless controllers

Specifications

¹Capacity varies based on the number of indoor units operating and the model of the Multi-zone Outdoor Unit. For reference to connected capacity charts, please refer Multi-zone Outdoor Unit Operational Performance.

Dimensions

The MSZ-GS24NA indoor unit is a slim wall-mounted unit, larger than the GS12NA. Key dimensions include a width of approximately 43-5/16 inches, depth of 9-3/8 inches, and height of 12-13/16 inches. The unit features an air intake at the top and an air outlet at the front. Piping connections, including gas and liquid lines, and a drain hose, are located on the side. The installation plate has specific mounting hole configurations. The wireless remote controller is compact, with dimensions of approximately 7-5/8 inches width and 2-3/8 inches height.

Accessories

^†Requires MAC-334IF-E

M-Series EZ FIT® Recessed Ceiling Cassette, Floor-mount and Wall-mount units allow indoor units to connect to an MA Controller: Deluxe MA Remote Controller, Simple MA Controller, Touch MA Controller.

Features

• Variable speed INVETER-driven compressor
• Built-in base pan heater
• Quiet outdoor unit operation as low as 54 dB(A)
• High pressure protection
• Compressor thermal protection
• Compressor overcurrent detection
• Fan motor overheating/voltage protection
• Hyper-heating performance offers 100% heating capacity at 5°F and 88% heating capacity at -13°F
• ENERGY STAR® certified (non-ducted)

Specifications

Electrical Power Requirements

Outdoor Unit

¹AHRI Rated Conditions: Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB. (Rated data is determined at a fixed compressor speed)

²AHRI Rated Conditions: Heating at 47°F (Indoor // Outdoor) °F 70 DB, 60 WB // 47 DB, 43 WB. (Rated data is determined at a fixed compressor speed)

*Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.

^A5°F DB - 115°F DB when optional wind baffles are installed

For actual capacity performance based on indoor unit type and number of indoor units connected, please refer to MXZ Operational Performance. Although the maximum connectable capacity is 130%, the outdoor unit cannot provide more than 100% of the rated capacity. Please utilize this over capacity capability for load shedding or applications where it is known that all connected units will NOT be operating at the same time.

Dimensions

The MXZ-3C30NAHZ3 outdoor unit is a compact heat pump system. Key dimensions include a width of approximately 37-13/32 inches, depth of 13 inches, and height of 41-17/64 inches. The unit features side air intake and rear air discharge. Service space requirements are specified as 1. FREE SPACE (e.g., 19-11/16" or more) and 2. SERVICE SPACE (e.g., 13-25/32" or more). Piping connections for liquid and gas lines, along with a drain hole, are located on the unit. Conduit plate details for electrical connections are also shown.

Outdoor Unit Accessories