LIVARNO home Product Manual

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

General Care Instructions

• Keep this instruction manual in a safe place for future reference.
• Always do your cutting on chopping boards made of wood or soft plastic. Only use the product for cutting food.
• This product is made of high-quality stainless steel.
• After each use: Always clean the product immediately (especially after cutting acidic foods). Food residue might otherwise cause discolouration or flash rust. For that reason, do not leave the product dirty for a longer period of time.
• Removing spots from the product: Use metal polish (without emery additives).
• Suitable for dishwashers. It is nevertheless recommended to clean the product by hand in order to protect it from aggressive cleaning agents in the dishwasher and from mechanical damage, such as flash rust, resulting from rusting screws in pots and lids.
• Do not clean the product with aggressive dishwashing sponges with a scouring side or steel sponges. This could damage the coating of the product.

Cleaning in a Dishwasher

• Follow the instruction manual of your dishwasher.
• After cleaning: Remove the product from the dishwasher and dry, if necessary.
• Alternatively, open the dishwasher door a little in order for the steam to escape and to avoid accumulation of moisture.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.

This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty Claim Procedure

To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (IAN 460043_2401) available as proof of purchase.
• You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
• If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

Service Great Britain

Tel.: 08000569216

E-Mail: owim@lidl.co.uk

Product Information

Item Number: IAN 460043_2401

Manufacturer: OWIM GmbH & Co. KG

Address: Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY

Model Numbers: HG06454A, HG06454B, HG06454C, HG06454D

Version: 06/2024