Product: BERNSTEIN BS Rimless Wall Niche
This document provides assembly instructions for the BERNSTEIN BS rimless wall niche, also known as WANDNISCHE BS, randlos.
Dimensions Overview
The niche is depicted with its dimensions. The width is shown as 300mm, the depth as 100mm, and the length is indicated as either 300mm or 600mm.
Assembly Instructions
- Prepare Wall Opening: Create a wall cutout that is slightly larger than the dimensions of your wall niche.
- Install Niche:
- Apply tile adhesive inside the prepared wall section.
- Place your wall niche horizontally and flush within the opening.
- Apply silicone sealant to the back of the niche panel for sealing.
- Alternative Installation: The niche can also be fixed using 4 screws and dowels.
- Tile Wall: Tile your wall over the frame of your wall niche, covering the edges.
- Completion: Once the tile adhesive hardens, the niche is ready for use.
Installation Process Visual
This sequence illustrates the installation process. The first image shows a wall cutout with a niche being inserted. Labels 'a' and 'b' point to areas where adhesive or sealant should be applied. The second image shows the niche fitted into the wall. The third image depicts tiling work being done around the niche frame. The final image shows the completed niche installed in a tiled wall, containing bathroom products.
Available Niche Sizes
This section displays various available sizes for the niche, all with a 10mm depth. The dimensions shown are: 300mm by 300mm, 600mm by 300mm, 300mm by 150mm, and 600mm by 150mm.
Important Statement
This assembly guide is provided as a standard reference. Modifications applied to updated versions of the product may not be detailed in this document. In such cases, please use this manual as a general reference. The company reserves the right to make modifications to the product and its specifications without prior notice. All figures and drawings are for illustration purposes only and do not represent absolute current specifications.
