UPPSPEL Pegboard
Product Overview
The UPPSPEL pegboard from IKEA is designed for organizing and displaying items. This document provides assembly instructions.
Important Information
As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
עברית: קירות שונים עשויים מחומרים שונים, לכן האריזה אינה כוללת אבזרי חיבור. מומלץ לפנות לחנות מתמחה בנוגע לאבזרי החיבור המתאימים לסוג הקיר שבביתכם.
Tools Required
The following tools are recommended for assembly:
- Screwdriver
- Spirit level
- Pencil
- Measuring tape
Parts Included
- 4x Screws (Part 153312)
- 2x Caps (Part 153307)
- 1x Mounting rail (Part 153305)
Assembly Steps
-
Step 1: Wall Mounting
Measure and mark the desired location on the wall. Ensure the mounting points are level using a spirit level. The recommended spacing for mounting points is 60 cm (23 5/8").
Diagram shows two mounting rails being attached to a wall, with a spirit level indicating correct horizontal placement.
-
Step 2: Attaching Mounting Rails
Attach the mounting rails to the wall using appropriate screws (not included). Ensure the rails are securely fastened.
Diagram shows two mounting rails being attached to the wall with screws. A detail shows the correct way to insert a screw and cap.
-
Step 3: Attaching Pegboard
Align the pegboard with the mounted rails. Insert screws through the designated holes in the pegboard and into the mounting rails. Secure with caps.
Diagram shows the pegboard being attached to the mounting rails with screws and caps. Close-up views illustrate the insertion process.
-
Step 4: Securing Pegboard
Ensure the pegboard is firmly attached to the mounting rails. Check all connections.
Diagram shows a close-up of the pegboard being secured to the mounting rail with screws.
Care and Maintenance
Wipe clean with a damp cloth. Wipe dry with a clean cloth.
