iStore 270L Heat Pump Installation Diagrams

Unit Dimensions and Clearances

Left side install

Unit: mm

Overall width: 640 mm

Height: 1955 mm

Key Connection Points:

• Electrical Circuit: To AS/NZS 3000
• Isolation Point: Marked with a green circle.
• Hot Water Outlet: Indicated by a red circle.
• Cold Water Supply: Indicated by a blue circle.

Slab Requirements:

Slab Height: 100 mm

The unit is to be placed on a level surface in accordance with building and plumbing codes.

Ground Level (-01 Courses)

00 Course level

Clearances (Diagram 2 - not to scale):

Diagram 2 illustrates recommended clearances around the unit. Specific measurements are provided as 50 mm, 1000 mm, and 50 mm for different sides.

Installation Guidelines:

• Place tank on level surface and in accordance with building and plumbing codes.
• Avoid positioning near bedrooms or neighbours bedrooms.
• Ensure the minimum space between the iStore and walls and objects is as per specifications illustrated in Diagram 2.