BISSELL SpotClean Pet Pro 1558

Introduction

This guide provides instructions for the BISSELL SpotClean Pet Pro 1558. It covers assembly, operation, and maintenance to ensure optimal performance.

Languages included: English, Bulgarian, Bosnian, Czech, German, Danish, Greek, Spanish, Estonian, Finnish, French, Croatian, Hungarian, Italian, Latvian, Macedonian, Malay, Dutch, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Slovak, Slovenian, Serbian, Turkish.

What's in the Box ?❓

Your BISSELL SpotClean Pet Pro package should contain:

• Main cleaning machine unit [Machine Unit]
• Floor tool [Floor Tool]
• Hose and wand assembly [Hose and Wand]
• Cleaning solution bottle [Cleaning Solution Bottle]

Assembly: Hose and Wand [Hose and Wand]

1. → Attach the hose to the back of the machine unit.
2. → Connect the wand to the end of the hose.
3. → Ensure the hose is securely connected to the wand.
4. → Secure the hose connection point.
5. → Confirm the final hose connection is firm.

Operation: Filling the Clean Water Tank ?

Important Safety Note: ⚠️ Use only clean water and BISSELL cleaning solutions. Do not exceed 60°C (140°F) water temperature.

1. Remove the clean water tank from the machine.
2. Unscrew the cap from the clean water tank.
3. Fill the tank with clean, warm water.
4. Add the recommended amount of BISSELL cleaning solution (e.g., Wash & Remove, Wash & Protect, Wash & Refresh, Oxygen Boost).
5. Screw the cap back onto the tank securely.
6. Replace the filled clean water tank into the machine.
7. Ensure the tank is properly seated and secured.

Operation: Cleaning Surfaces ?

Important Safety Note: ⚠️ Do not use on electronics or wet surfaces. ❌

1. Ensure the hose is connected to the machine and wand.
2. Press the trigger on the wand to spray cleaning solution onto the stained area.
3. Move the floor tool back and forth across the stain.
4. Plug the machine into a suitable electrical outlet. ?⚡
5. Apply cleaning solution to the stain.
6. Use the brush tool on the stain, applying cleaning solution [Cleaning Solution W].
7. Press the trigger to spray the solution.
8. Suction the dirty water from the surface.
9. Release the trigger to stop spraying.
10. Continue suctioning the area to remove moisture.

Maintenance: Emptying the Dirty Water Tank

1. Prepare a bucket with clean water.
2. Detach the dirty water tank from the machine.
3. Remove the lid from the dirty water tank.
4. Lift out the internal filter from the tank.
5. Empty the dirty water into a sink or toilet.
6. Remove the tank lid.
7. Replace the tank lid securely.
8. Reattach the dirty water tank to the machine.

Maintenance: Cleaning the Machine and Parts

Regular cleaning ensures the longevity and performance of your BISSELL SpotClean Pet Pro.

1. Fill a bucket with clean water.
2. Connect the hose to the machine.
3. Dip the brush tool into the clean water.
4. Rinse the brush tool thoroughly.
5. Rinse the hose.
6. Rinse the clean water tank.
7. Remove and rinse the tank lid.
8. Rinse the dirty water tank.
9. Fill the dirty water tank with clean water for rinsing.
10. Wipe the machine exterior with a damp cloth.
11. Clean the hose.
12. Rinse the wand under a tap [Tap].
13. Rinse the brush tool under a tap [Tap].
14. Rotate the brush tool to ensure thorough rinsing.

Maintenance: Drying and Storage

1. Dry the clean water tank.
2. Dry the tank lid.
3. Dry the dirty water tank.
4. Dry the hose.
5. Dry the wand.
6. Dry the brush tool.
7. Allow all parts to air dry completely, preferably in a well-ventilated area or with sunlight ☀️.
8. Reassemble the machine for storage.
9. Secure the hose and wand for transport and storage.