BISSELL Little Green® Pet Pro

Product Overview

• A. Power Switch
• B. Clean Water Tank
• C. Dirty Water Tank
• D. Quick Release™ Cord Wrap and Power Cord
• E. Flexible Hose

Diagram Description: A line drawing shows the portable carpet cleaner with labels A through E pointing to the power switch, clean water tank, dirty water tank, cord wrap, and hose.

Getting Started

Go to support.BISSELL.com for a walkthrough of your new purchase, including videos, tips, support, and more. This guide has all the information you need to set up your new product.

Important Safety Instructions

Read all instructions before using your appliance. When using an electrical appliance, basic precautions should be observed, including the following:

⚠ WARNING

To Reduce the Risk of Fire, Electric Shock or Injury:

• Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
• Do not expose to rain. Store indoors.
• Use only cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formulas section of this guide.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Do not use for any purpose other than described in this user guide.
• Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and have it repaired at an authorized service center.
• Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories.
• Turn OFF all controls before plugging or unplugging appliance.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
• Do not turn your appliance ON until you are familiar with all instructions and operating procedures.
• Keep appliance on a level surface.
• Liquid must not be directed towards equipment containing electrical components.
• Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
• Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.)
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.
• Connect to a properly grounded outlet only. See grounding instructions. Do not modify the three-prong grounded plug.
• Do not apply liquid directly to any person or animal.
• Do not carry the machine while in use.
• Plastic tanks are not dishwasher safe. Do not put tanks in dishwasher.

Grounding Instructions

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Diagram Description: An illustration shows a grounded outlet with a grounding pin and a plug with a grounding pin, indicating proper connection.

Important Information

To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal components may result.

Save These Instructions

This model is for household use only. Commercial use of this unit voids the manufacturer's warranty.

Tools Included in Box Will Differ by Model

To see what's included with your purchase, check the "Carton Contents" list on the top flap of the box.

• Machine
• Self-Cleaning Tough Stain Tool
• Specialized Pet Hair Removal Tool Block
• Spraying Crevice Tool (select models only)
• Trial Formula(s) (vary by model)

Filling the Clean Water Tank

Find more formulas at BISSELL.com.

For optimal performance, use genuine BISSELL formulas in your machine. Other formulas or household cleaners may cause defects or damage to the machine.

Steps:

1. Choose your formula. Visit BISSELL.com for formulas.
2. Remove clean water tank from machine by lifting carry handle.
3. Flip cap open.
4. Add warm water (140°F/60°C max) to water fill line based on size of your mess. Small Area: 28 oz, Large Area: 56 oz.
5. Add formula to line based on size of your mess. Small Area: 4 oz, Large Area: 8 oz.
6. Close cap. Return clean tank to machine and click back into place.

Compatible BISSELL formulas include: Spot & Stain, PRO OXY Spot & Stain, PET Spot & Stain, PET PRO OXY Spot & Stain, Simply Spot & Stain PET.

⚠ WARNING

To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine.

Diagram Description: A series of six illustrations show the process: selecting a bottle, lifting the tank, opening the cap, adding water and formula to the tank, and closing the cap before returning the tank.

Using Your Machine

Before You Clean:

• Vacuum to remove loose dirt from areas to be cleaned.
• Spray any BISSELL® stain pretreat formula on soiled areas and allow to sit for a few minutes.
• Tip: For upholstery, work in small sections until area is clean.

Cleaning Steps:

1. Release hose by pulling away from hose clip.
2. Attach desired tool to hose until it clicks.
3. Twist Quick Release Cord Wrap to remove cord. Plug cord into outlet.
4. Turn machine ON.
5. Press and hold trigger over sink or bowl to prime the machine until liquid sprays out.
6. While holding tool above desired area, press and hold trigger to spray solution.
7. Release spray trigger and gently scrub stain using bristles.
8. With trigger released, press tool firmly against surface and pull towards you to remove stain. Repeat as needed.
9. Turn machine OFF.

Diagram Description: A series of nine illustrations show the process: detaching the hose, attaching a tool, plugging in the cord, turning on the machine, priming the spray, spraying the area, scrubbing, extracting, and turning off the machine.

Cleaning with Tools

Cleaning with the Self-Cleaning Tough Stain Tool:

1. Choose your cleaning method: Use the bristle block for everyday soft surface cleaning, or the rubberized block to remove embedded pet hair and debris.
2. Pull bottom latch to release bristle block from tool.
3. Insert your preferred tool attachment; it will click into place.
4. Slide tool lever up to ensure tool is in SPRAY mode. Follow cleaning steps on page 4.

Diagram Description: Three illustrations show selecting the cleaning block (bristle or rubberized), releasing the block, and inserting an attachment. A fourth shows sliding the tool lever.

Cleaning with the Spraying Crevice Tool (select models):

1. While holding tool above the stained area, press and hold the trigger to spray solution.
2. Release spray trigger and press tool firmly against surface and pull toward you to remove the stain. Repeat this step as needed.

Diagram Description: Two illustrations show using the crevice tool to spray and extract a stain from upholstery.

Cleaning Machine with Self-Cleaning Tough Stain Tool

Cleanout Mode:

1. Turn machine ON. Slide tool lever down for CLEANOUT mode.
2. Press the trigger to activate the CLEANOUT function. Solution mixture will spray through the tool and hose. Tip: For a more thorough rinse, place suction nozzle on soft surface and tilt forward/backward.
3. To continue cleaning with your machine, slide the tool's lever upward to return to SPRAY mode.

Diagram Description: Three illustrations show the machine on, the tool lever moved down for cleanout, and the lever moved up for spray mode.

Emptying the Dirty Water Tank

Empty dirty water tank when water reaches "MAX" line. Do not let water overfill.

1. Remove dirty water tank and carry to a water disposal area.
2. To remove lid, hold bottom of dirty water tank and use handle inset to lift up and off.
3. Pour out dirty water. Rinse tank to remove any debris.
4. Align lid with bottom of tank and press down until secure.
5. Place dirty water tank back onto machine.

Diagram Description: A series of six illustrations show the process: the tank near the MAX line, carrying the tank, removing the lid, pouring out water and rinsing, securing the lid, and replacing the tank.

After-Cleaning Care

1. Be sure to empty dirty water tank after use (see above).
2. To disconnect tools, push down on button above hose grip and pull straight off. (Do NOT twist tool to remove it.)
3. Remove tool lens.
4. Rinse lens under clean, running water. Allow to dry before reinstalling.
5. When finished using the machine, wrap cord around cord wrap for storage. Store indoors in a dry location in an area where it is not likely to get damaged.

Note: Any other maintenance or servicing not included in this manual should be performed by an authorized service representative.

Diagram Description: A series of five illustrations show emptying the tank, disconnecting a tool, removing a lens, rinsing the lens, and storing the machine with the cord wrapped.

Warranty

Limited 3-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information.

Terms and Conditions

Your purchase is subject to the BISSELL® Terms and Conditions, which includes dispute resolution through arbitration and class waiver. For complete terms or to opt out from arbitration or class waiver, visit BISSELL.com/terms-of-use or call 1-800-237-7691.

BISSELL Pet Foundation Support

BISSELL proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL® product, you help save pets, too. We're proud to design products that help make pet messes, odors and pet homelessness disappear.

Visit BISSELLsavespets.com to learn more.

Need More Support?

Head to support.BISSELL.com to troubleshoot, register your product, order spare parts, view your warranty, and more.

• [register]
• [info]
• [video]
• [parts]
• [support]