BISSELL SPOTCLEAN® (C2, C3, STAINLIFT) LITTLE GREEN

Product Overview

This document provides instructions for the BISSELL SpotClean Little Green portable carpet and upholstery cleaner. It covers setup, operation, and maintenance for models C2, C3, StainLift, series 3619, 2067, and 3619N.

Key sections include:

• Unboxing and Setup [?⬆️]
• Assembly and Connection [↔️?]
• Filling the Clean Water Tank [?+]
• Operation [⚡]
• Emptying and Cleaning the Dirty Water Tank [?➡️]
• Maintenance and Storage [✨✋]

What's Included

The package typically includes:

• BISSELL SpotClean Little Green main unit
• Upholstery Tool
• Stain Tool
• BISSELL cleaning formula bottle [?]
• Screw [?] (may be for specific assembly)

Model number 3619N is also associated with this product line.

Assembly & Connection

Follow these steps to assemble and connect your SpotClean Little Green:

1. Connect the hose to the main unit.
2. Attach the cleaning tool to the end of the hose.
3. Route the hose along the body of the unit for tidy storage.
4. Secure the hose in place.

Filling the Clean Water Tank

Before use, fill the clean water tank. Please note the following:

[⚠️] Safety warning. Do not exceed 60°C (140°F) for water temperature [?️ 60°C].

1. Open the clean tank lid.
2. Remove the clean tank from the unit.
3. Fill the tank with the appropriate BISSELL cleaning formula [?].
4. Fill the tank with warm tap water [?].
5. Replace the clean tank securely into the unit.
6. Close the clean tank lid.

Compatible cleaning formulas include: Spot & Stain, Pet Stain & Odour, Natural Pet Spot & Stain, Spot & Stain Pro Oxy, Oxygen Boost.

Operation

To operate the SpotClean Little Green:

1. Ensure the hose and tool are properly connected.
2. Manage the hose to prevent tangling.
3. Plug the unit into a suitable power outlet [?].
4. Attach the desired cleaning tool to the hose.
5. Plug the unit into a power outlet [?].
6. Press the power button [⚡] to turn the unit on.
7. Press the trigger on the cleaning tool to spray cleaning solution onto the soiled area.
8. Scrub the area as needed, then vacuum the loosened dirt and moisture.

Emptying & Cleaning the Dirty Water Tank

After cleaning, empty and clean the dirty water tank:

1. Press the release button to detach the dirty water tank.
2. Remove the dirty water tank from the unit.
3. Empty the dirty water into a sink [?] or toilet.
4. Rinse the tank with clean water.
5. Refill the tank with clean water.
6. Rinse the tank again.
7. Empty the rinse water.
8. Replace the dirty water tank securely into the unit.

Maintenance & Storage

Proper maintenance ensures longevity and performance:

1. Clean the unit after each use.
2. Plug the unit into power [?] for any necessary rinsing steps.
3. Fill the clean tank with water and run the unit to rinse internal components.
4. Clean the nozzle thoroughly.
5. Plug the unit into power [?].
6. Rinse the nozzle under running water [?].
7. Attach the nozzle to the designated storage clip on the unit.
8. Rinse the nozzle under running water [?] if necessary.
9. Allow all tools and hoses to dry completely, ideally for 24 hours [⏳ 24h], before storing.
10. Store the hose and power cord neatly.
11. Store the unit in a dry, protected location.

©2023 BISSELL Inc. All rights reserved. Part Number 1637462 06/23 v2