Important Safety and Usage Information
This product is intended for indoor use only.
Safety Warning: If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Instructions
Follow these steps to assemble your ÅRSTID floor lamp:
Step 1: Prepare the Base and Pole
Begin by placing the lamp base on a stable surface. Take the lower section of the lamp pole and screw it into the base. A close-up view shows the threaded connection being secured.
A separate component, possibly a decorative ring or connector, is shown being inserted into the base, fitting into a designated receptacle.
Step 2: Connect Pole Sections
Continue assembling the lamp pole by connecting the subsequent sections. Each section screws into the one below it. A close-up view illustrates the process of screwing one pole section into another, ensuring a secure fit.
Step 3: Secure the Pole to the Base and Manage the Cord
Ensure the assembled pole is firmly attached to the base. A close-up shows the electrical cord being routed through the base and secured, possibly with a locking mechanism or by being fed through a designated channel.
Step 4: Attach the Lamp Holder Assembly
At the top of the assembled pole, attach the lamp holder assembly. This involves screwing a component onto the threaded top of the pole. The diagram shows an upward arrow [↑] indicating the placement of the lamp holder onto the pole.
Step 5: Install the Lampshade
Finally, attach the lampshade to the lamp holder. This typically involves placing the shade over the bulb socket and securing it with a retaining ring or nut, as shown in the diagram. The lampshade is pleated and sits atop the lamp holder.
