Edifier X5 Pro True Wireless Noise Cancelling Earbuds

1. Power ON/OFF

Open or close the charging case ?️ to power the earbuds ? on or off.

Visual representation: An illustration shows the charging case opening and closing, with icons indicating:

• 1s: [1 second press].
• x3: [Triple press].

2. First Pairing

When powered on for the first time, the earbuds will automatically enter Bluetooth ? pairing mode.

To connect:

1. Once powered on, the earbuds automatically enter Bluetooth pairing mode.
2. Select "EDIFIER X5 Pro" from your device's ? Bluetooth list to connect.

Visual representation: A diagram shows the earbuds in the open case, and a smartphone screen displaying Bluetooth settings with "EDIFIER X5 Pro" highlighted for selection.

3. Pairing for New Device

To connect to a new device after initial pairing:

1. Place the earbuds ? in the charging case ?️ and keep the case open.
2. Press and hold the button on the case for [3 second press]. The earbuds will enter Bluetooth ? pairing mode.
3. Select "EDIFIER X5 Pro" from your new device's ? Bluetooth list to connect.

Note: For subsequent use, the earbuds will automatically connect to the last connected device.

Visual representation: An illustration shows the earbuds in the open case, a finger pressing the case button for 3 seconds, and a smartphone screen showing Bluetooth settings with "EDIFIER X5 Pro" ready to be selected.

4. Reset / Left & Right Connection

To reset the earbuds and restore factory settings, or to re-establish connection between left and right earbuds:

1. Place the earbuds ? in the charging case ?️ and keep the case open.
2. Press the button on the case [Triple press]. The white LED on the case will blink until the reset is complete.
3. After the reset, the earbuds will automatically enter Bluetooth ? pairing mode.

Note: This operation will clear all previous pairing records, reconnect the left and right earbuds, and restore factory settings.

Visual representation: An illustration shows the earbuds in the open case, a finger performing a triple press on the case button, followed by a blinking white LED indicator on the case.

5. Multipoint Connection

Connect to two devices simultaneously.

1. Manually pair device A with the earbuds ? and keep the earbuds in the charging case ?️.
2. Press and hold the button on the case for [3 second press] to re-enter Bluetooth ? pairing mode. On device B, select "EDIFIER X5 Pro" from its ? Bluetooth settings to connect.
3. On device A, select "EDIFIER X5 Pro" again from its ? Bluetooth settings to complete the multipoint connection.

Visual representation: A sequence of diagrams shows pairing with a first device (A), then entering pairing mode again to connect to a second device (B), and finally confirming connection on both devices, often depicted with phone and laptop icons.

6. Controls

Control playback, calls, and noise cancellation modes using the touch controls on the earbuds.

Left Earbud (L) Controls:

• Double Press (x2): Cycle through sound modes: [High Noise Cancellation] / [Wind Reduction] / [Ambient Sound].
• Triple Press (x3): (Function may be customizable via EDIFIER ConneX App)
• Press and Hold (-): (Function may be customizable via EDIFIER ConneX App)

Right Earbud (R) Controls:

• Double Press (x2): [Play/Pause] music ▶️/⏸️; [Answer/End Call] ?.
• Triple Press (x3): (Function may be customizable via EDIFIER ConneX App)
• Press and Hold (-): (Function may be customizable via EDIFIER ConneX App)

Note:

• The default sound control modes are High Noise Cancellation, Wind Reduction, and Ambient Sound.
• Download the EDIFIER ConneX App to customize more control settings and functions.

Visual representation: Diagrams illustrate the left and right earbuds with touch-sensitive areas. For the left earbud, a double press (x2) is associated with icons representing noise cancellation (e.g., concentric circles), wind reduction (e.g., a gust of wind), and ambient sound (e.g., an ear with sound waves). For the right earbud, a double press (x2) is associated with icons for play/pause (▶️/⏸️) and answering/ending a call (?).

7. Charging

Charge the earbuds ? and the case ?️ using the included USB-C cable.

• Connect the included USB-C cable to a power source ?.
• Input Specifications:
  • Earbuds: 5V = 200mA
  • Charging Case: 5V = 1A

Note: Ensure the earbuds and the USB-C port are completely dry before charging.

Visual representation: An illustration shows a USB-C cable connecting to the charging case, which houses the earbuds. A power source icon (like a wall adapter) is also depicted.