1. Power ON/OFF
Open or close the charging case to turn the earbuds on or off.
2. First Pairing
Once powered on, the earbuds will automatically enter Bluetooth pairing mode. Select "EDIFIER LolliClip" from your device list to connect.
3. Pairing for New Device
- Place the earbuds in the case and keep it open.
- Press and hold the button on the case for 3 seconds until white and orange LEDs blink.
Note: For subsequent use, the earbuds will automatically connect to the device used last time.
4. Reset
- Place the earbuds in the case and keep it open.
- Press the button on the case 3 times; the white LED will blink until the reset is complete.
5. Multipoint Connection
- Pair device A with the earbuds manually and keep the earbuds in the case.
- Re-enter Bluetooth pairing and select "EDIFIER LolliClip" in device B settings to connect.
- Select "EDIFIER LolliClip" again in device A settings to complete the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect to the two devices used last time.
6. Controls
Left Earbud (L) and Right Earbud (R):
- Double tap (x2) for specific functions.
- Triple tap (x3) for specific functions.
Download the EDIFIER ConneX App for more customizable control settings.
7. Charging
Input: 5V-200mA (Earbuds), 5V-1A (Charging case).
Note: Ensure the USB port is completely dry before charging.
8. Heart Rate and Blood Oxygen Detection
The heart rate and blood oxygen detection functions must be enabled in the EDIFIER ConneX app.
Note: This product is not a medical device. The data provided is for reference only and cannot be used for clinical diagnosis or treatment.
