MACKAPÄR Coat Rack with Shoe Storage

Safety Warnings

⚠️ WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws and wall plugs are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

(Note: This warning is provided in multiple languages in the original document.)

Parts List

The following parts are included in the package:

• 16x Cylindrical connectors (Part #153359)
• 8x Screws (Part #153807)
• 2x Caps (Part #112673)
• 10x Hooks (Part #10097886)
• 8x Shelf supports (Part #10090520 / #10090521)

Important: Screws and wall plugs for attaching the unit to the wall are not included and must be purchased separately, suitable for your wall type.

Assembly Instructions

Follow these steps carefully to assemble your MACKAPÄR unit. Tools required: Screwdriver, Spirit Level (not included).

Step 1: Lay out the main frame components on a protected surface (e.g., a rug). Connect the horizontal and vertical frame pieces using the cylindrical connectors (153359). Ensure parts are aligned correctly and do not force them. [? STOP symbol indicates not to force.]

Step 2: Attach the lower horizontal bars to the side frame pieces using the provided pins.

Step 3: Secure the mesh side panels to the frame using screws (153807). Ensure the panels are correctly oriented.

Step 4: Repeat Step 1 to assemble the upper section of the frame.

Step 5: Insert the shelf supports into the designated holes on the upper frame sections.

Step 6: Repeat Step 1 to connect the upper frame components.

Step 7: Insert the shelf supports into the designated holes on the upper frame sections.

Step 8: Attach the top frame piece to the vertical poles using screws (153807).

Step 9: Insert the remaining shelf supports into the designated holes on the frame.

Step 10: Place the shelves onto the shelf supports. Ensure they are seated correctly.

Step 11: Attach the coat hooks to the top horizontal rails using screws. Ensure the hooks are facing the correct direction.

Step 12: The main structure of the coat rack is now assembled. Ensure all connections are secure.

Step 13: Secure the top section of the unit. A "Click!" sound indicates a successful connection. [▶️ Click! symbol represents secure connection.]

Important Usage Information

⚠️ Do Not Sit on the Furniture

The diagram illustrates that sitting on the unit is prohibited [❌ symbol indicates prohibition]. This furniture is not designed to support the weight of a person. Doing so could lead to injury or damage to the product.