PINNIG Coat Rack with Shoe Storage Bench

Safety Warning

WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Parts List

• Long screws (Part 100193): 14x
• Medium screws (Part 110907): 6x
• Small screws (Part 150691): 10x
• Screws (Part 100001): 8x
• Screws (Part 105042): 8x
• Nuts (Part 130610): 6x
• Caps/Plugs (Part 100610): 4x
• Caps/Plugs (Part 101412): 2x
• Allen key (Part 108184): 1x
• Allen key (Part 100006): 1x
• Allen key (Part 100002): 1x
• Vertical frame poles: 4x
• Horizontal support bars: Multiple
• Hooks: 14x (2 small, 12 medium)
• Perforated shelves: 2x
• Slatted bench top: 1x
• Wall attachment brackets: 2x

Assembly Instructions

Follow these steps carefully to assemble your PINNIG coat rack and shoe storage bench.

Step 1: Assemble the Base Frame

Connect the four vertical poles to the base structure, which includes the two perforated shelves. Use screws (e.g., 100193) and Allen keys (e.g., 108184, 100002) to secure the frame. [Detail view shows screw insertion and tightening].

Step 2: Attach Bench Slats and Top Supports

Place the slatted bench top onto its supports. Attach the upper and lower horizontal hook rails to the vertical poles using screws and Allen keys. [Detail views show bracket attachment and screw insertion].

Step 3: Install Top Bar

Insert and secure the main top horizontal bar into the top of the vertical poles. [Diagram shows insertion into pole tops].

Step 4: Attach Hooks

Mount the hooks onto the hook rails using the provided brackets and screws. [Diagrams show hook attachment mechanism].

Step 5: Prepare for Wall Mounting

Attach the wall attachment brackets to the top rear of the assembled unit using screws and caps. [Diagrams show bracket attachment to frame].

Step 6: Secure to Wall

Position the assembled unit against the wall and secure it using appropriate wall fixings (not included) through the wall attachment brackets. This is crucial for stability and safety. [Diagrams show wall attachment process].

Product Information

The PINNIG coat rack and shoe storage bench is designed to provide convenient storage for coats, hats, and shoes while offering a seating option. It is important to secure the unit to the wall to prevent it from tipping over, which could cause serious injury.