ALLMATIC 24CBA MOVEO & KALOS XL Battery Charger Module
Document Reference: 6-1624874/rev.3
Product Overview
This document provides an overview and installation guidance for the ALLMATIC 24CBA series battery charger modules, specifically the MOVEO and KALOS XL models. These modules are designed to provide backup power for automation systems.
Key Components and Features
Battery Charger Module Housing
The system features an interlocking housing designed to accommodate the 24V backup battery charger module. This housing ensures secure placement and integration of the module.
[Diagram Description: Illustration of the interlocking housing designed to accommodate the backup battery charger module.]
Battery Housing
A dedicated housing is provided for the emergency batteries. This compartment is designed to securely hold the batteries within the automation system's enclosure.
[Diagram Description: Illustration of the housing designed to hold the emergency batteries.]
24V Backup Battery Charger Module
The core component is the 24V backup battery charger module, model number 12000782. This module may include an optional electronic charge control feature for optimized battery management.
[Diagram Description: Close-up view of the 24V backup battery charger module (model 12000782) and two emergency batteries (model 2x 61400053) connected in series.]
[Diagram Description: Close-up of the 24V backup battery charger module showing model details and connection points.]
Emergency Batteries
The system utilizes emergency batteries, typically two 1.3Ah batteries (model 2x 61400053). These are designed to be connected in series to provide a 24Vdc power supply.
[Diagram Description: Close-up view of the 24V backup battery charger module and two emergency batteries secured with a plastic tie.]
Installation Steps
The following steps outline the installation process for the 24CBA battery charger module and batteries:
-
Connect Module to Control Board: Insert the connector from the 24CBA module into the dedicated terminal on the control board, labeled 'BIOS1 24'.
[Diagram Description: Close-up view of the control board showing connection terminals, including a terminal labeled 'BIOS1 24'.]
-
Position Housing and Batteries: Place the plastic cover of the central unit. Then, position the batteries above the central unit as shown in the accompanying diagrams.
[Diagram Description: Illustration of the housing for the battery charger module.]
[Diagram Description: Illustration of the housing for the batteries.]
-
Connect Battery Cables: Connect the cables originating from the 24CBA module to the batteries. Ensure that the polarity (+/-) is correctly observed during connection.
[Diagram Description: Close-up of the control board with wires connected to the battery charger module and terminals.]
-
Secure Batteries: Lock the batteries in place using a plastic cable tie to prevent movement.
