About Easy Start
The Easy Start system is designed to reduce the starting current of compressors, thereby preventing damage and improving efficiency. This document covers the installation process, including wiring, jumper settings, and troubleshooting.
Key Features
- Models: 364 (3 ton) and 368 (6 ton)
- Reduces compressor start current
- Improves system efficiency
- Includes detailed wiring diagrams
- Provides troubleshooting guidance
Installation Overview
Before beginning installation, ensure all power to the compressor's electrical system is turned off. Carefully follow the wiring instructions provided in this manual to connect the Easy Start unit to the compressor's start and run capacitors, as well as the control circuit. Pay close attention to the specific wiring requirements for different compressor configurations.
For detailed steps, refer to the retrofit instructions and wiring diagrams within the full manual.
Troubleshooting and Support
This manual includes a troubleshooting section to help diagnose common issues, such as wiring errors or component failures. Diagnostic lights on the Easy Start unit provide indicators for various fault conditions.
For further assistance, Micro Air Corporation can be contacted at:
Micro Air Corporation
124 Route 526.
Allentown NJ 08501
Phone: (609) 259-2636
Website: www.Microair.net
