EasyStart Universal Installation Kit

This installation kit is designed for customers who are installing an EasyStart for RV, Marine, or Residential applications.

Kit Contents

The components of the EasyStart Universal Installation Kit are visually arranged as follows: A coiled black wire harness (1) is positioned in the upper left, accompanied by white adhesive strips (2) to its right. Below these are various electrical connectors: four white end splice connectors (3), two blue female angled quick connects (4), two yellow female quick disconnects (5), and a black snap bushing (6). Further down are a yellow male quick disconnect (7), a blue male quick disconnect (8), a piggyback connector (9), and a blue female angled quick connect with a flag terminal (10). To the right of the connectors are five white zip ties (11), two yellow ring terminals (12), a white cable gland (13), an orange splicing connector (14), and four silver self-drilling screws (15).

The following specific components are included:

1. (1) 14 AWG Wire
2. (1) Double-sided foam tape
3. (4) End splice connector
4. (2) Female blue angled quick connect
5. (2) Female yellow quick disconnect
6. (1) Snap bushing (3/4" diameter)
7. (1) Male yellow quick disconnect
8. (1) Male blue quick disconnect
9. (1) Piggyback connector
10. (1) Female blue angled quick connect (flag)
11. (5) Zip ties
12. (2) Lug ring yellow #10
13. (1) Cable gland (7/8" threaded gland for 1/2" in cable)
14. (2) Splicing connector
15. (4) Stainless steel self-drilling screws