Sylvania SP776-B-DG_CS4 Bluetooth Light Up Speaker
Model No: SP776-B-DG_CS4
Introduction
Thank you for purchasing the Sylvania SP776-B-DG_CS4 Bluetooth Light Up Speaker. Please read all instructions carefully before use.
Getting Started
In the box:
- Bluetooth Speaker
- USB charging cable
- Instruction Manual
Features:
- Bluetooth wireless connection functionality
- Built-in rechargeable battery
- Support USB/TF card
- FM radio, search and record
Safety Instructions
- Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquids.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician.
- Do not put objects into any of the openings. Keep the unit free from dust, lint, etc.
- Do not use this unit for anything other than its intended use.
- Keep the unit out of reach of children. This product is not a toy.
- Do not use abrasive cleaning solvents to clean.
- To minimize the risk of fire or electrical shock, avoid operating in wet conditions.
- Do not operate around water (e.g., bathroom, swimming pool, etc.).
- Do not expose to excessive heat such as sunshine or fire.
- Never immerse the unit in water or any other liquid for cleaning purposes.
Controls and Ports
Front Panel:
- MODE/V-II/SCAN/V+
- USB Slot
- DC 5V Charging Port
- AUX Input
- ON/OFF Switch
Button Functions:
- MODE: Short press to change the mode to Bluetooth, FM, USB, TF card, and AUX in. Default mode is Bluetooth.
- 1/+: Under FM/USB/TF/Bluetooth mode, short press to move to the previous channel/track. Press and hold to decrease the volume.
- Play/Pause: Under USB/TF/Bluetooth mode, short press for play and pause. Under FM mode, long press for automatic search.
- 2/+ : Under FM/USB/TF/Bluetooth mode, short press to move to the next channel/track. Press and hold to increase the volume.
Charging the Speaker
This unit has a built-in rechargeable battery. Before first use, charge the battery fully using the provided USB cable.
- Connect one end of the USB charging cable to a USB port or USB wall charger (not included).
- Connect the other end to the DC 5V charging slot of the speaker.
- The charging LED will be on when charging and will turn off when the battery is fully charged.
Pairing Your Device with Bluetooth Speaker
- Switch the speaker ON. The Bluetooth mode will activate automatically, and you will hear a tone.
- Place the speaker and your Bluetooth device (phone or music device) no further than 20 feet apart.
- Activate the Bluetooth function on your Bluetooth device.
- Select the pairing name "Syl SP776" from the list of available Bluetooth devices.
- If required, enter the password "0000" to confirm pairing.
- You will hear a tone indicating successful pairing.
The speaker will remember paired devices. To pair with a new device, turn off Bluetooth on the previously connected device or turn off the speaker and then search for "Syl SP776" with your new device.
Listening to Music
Once paired, you can stream music wirelessly. Select your desired track on your device and it will play through the speaker. You can control volume and skip tracks using your device.
USB/TF Card Playback
Insert a USB flash drive or TF card into the respective slot. The speaker will automatically start playing music, and Bluetooth mode will be disconnected.
FM Radio
Press the MODE button to switch to FM mode. Long press the Play/Pause button to initiate an automatic channel search. This process scans and records all available FM stations and may take several minutes.
Cleaning & Maintenance
- Turn OFF the speaker before cleaning.
- Use a dry cloth for cleaning. Never immerse the speaker in water.
Storage
- Turn OFF the power when not in use.
- Clean and store the speaker safely.
Do's and Don'ts
- Do: Read recommendations before use.
- Don't: Use abrasive cleaning solvents.
- Don't: Expose to extremely high or low temperatures.
- Don't: Dispose of in fire.
- Don't: Expose to sharp objects.
- Don't: Attempt to disassemble the speaker unless professional.
- Don't: Expose the speaker to heat or fire. Avoid storage in direct sunlight.
- Don't: Subject the speaker to mechanical shock.
- Don't: Add any fluids or solids to your speaker.
- Don't: Use the speaker if it has been damaged.
Specifications
- Bluetooth specification: V5.1
- Operating distance: 10 meters (max.)
- Speaker drive size: 3 inch
- Speaker power: 3W
- Frequency response: 100Hz-20KHz
- Signal to noise ratio: ≥85dB
- Charging time: About 3 hours
Note: Battery life & charging time may vary based on usage & types of devices used.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
To correct interference, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different outlet, or consulting a dealer or technician.
Warranty Information
This product is warranted to be free from defects in material and workmanship for ninety (90) days from the original purchase date. For service assistance and product information, please call 1-800-968-9853. To make a warranty claim, email support@curtiscs.com or call 1-800-968-9853. Do not return the product to the store.
Contact Information:
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3