SYLVANIA SP782 Karaoke 2 x 8" Light Up Bluetooth Speaker

Introduction

Thank you for purchasing the Sylvania SP782 Karaoke Bluetooth Speaker. Please read this instruction manual carefully before use and keep it for future reference to ensure the best performance.

Note: Specifications and features may change without prior notice for product improvement.

Package Contents

• 1 x Speaker
• 1 x USB charging cable
• 1 x Instruction manual

Specifications

• Input: DC 5V
• Drivers: 2 x 8" Full Range
• FM Frequency: 87.5~108.0 MHz
• Battery Capacity: 1500mAh
• Transmission Distance: 10m
• Dimensions: (WxHxD): 245x560x185mm

Product Overview and Controls

Power/Volume Dial: Twist clockwise/anticlockwise to power on/off and adjust volume.

Charging Indicator: Red light indicates charging; light off indicates fully charged.

DC Interface (5V): For charging the unit.

MODE/LED ON Button: Long press to turn the lights on/off. Short press to cycle through modes: Bluetooth, FM Radio, AUX Input, USB, TF.

Previous Track/TWS Button: Press to go to the previous track. Long press for TWS pairing.

Play/Pause/REC Button: Press to play/pause music. Long press for recording (in Bluetooth mode).

Next Track Button: Press to go to the next track.

TF/USB Input: Insert TF card or USB drive for playback.

AUX Input: Connect external audio devices via an audio cable.

MIC Input: Connect a microphone.

Charging the Battery

1. Charge the unit for at least 4 hours before first use.
2. Connect the USB charging cable to the DC 5V interface.
3. The charging indicator will be red while charging and turn off when fully charged.
4. The speaker can be used while charging.
5. Disconnect the USB cable after charging is complete.

Operating Instructions

Bluetooth Mode

1. Press the MODE/LED ON button to select Bluetooth mode.
2. Turn on Bluetooth on your device (phone, tablet, etc.) and select "Syl SP782".
3. The unit and device will connect automatically (no pairing code needed).
4. Use the control panel buttons (Next Song, Previous Song, Play/Pause) to manage playback.

TWS (True Wireless Speaker) Function

To use TWS, you need two SP782 speakers.

1. Ensure both speakers are turned on and in Bluetooth mode.
2. On one speaker, press and hold the TWS button (or Play/Pause button for 3 seconds as per some interpretations) until you hear a confirmation tone and the display indicates TWS is on.
3. The speakers will pair with each other.
4. Connect your Bluetooth device to one of the speakers by searching for "Syl SP782".
5. Music will now play through both speakers.
6. To turn off TWS, press and hold the TWS button again until it indicates 't off'.

FM Radio Function

1. Press the MODE/LED ON button to select FM mode.
2. Press the PLAY/PAUSE button to automatically scan and save radio stations.
3. Use the PREVIOUS or NEXT buttons to switch between saved stations.

AUX Input

1. Connect an audio cable from your external device (MP3 player, etc.) to the AUX IN JACK.
2. Press the MODE/LED ON button to select AUX mode.
3. Play music from your external device.

USB/TF Card Playback

1. Insert a USB drive or TF card into the respective port.
2. The speaker will automatically play music from the inserted media.
3. Use the playback control buttons to navigate tracks.

Microphone Input

Plug a microphone directly into the MIC IN JACK for use.

USB Recording Function

Note: Recording only works in Bluetooth mode and records to the USB drive if both TF card and USB are inserted.

1. Ensure the speaker is on and connected via Bluetooth.
2. Insert a USB drive.
3. Long press the REC button (or Play/Pause button for 3 seconds) to start recording. You will hear a "ding" prompt.
4. Long press the REC button (or Play/Pause button for 3 seconds) again to stop recording. You will hear a "ding ding" prompt.
5. To play the recording, switch to USB mode and use the next button to find the recorded file.
6. For best recording quality, set the Bluetooth device volume to maximum.
7. Pressing the MODE button during recording will stop it.

Do's and Don'ts

• Do not play music at excessive levels to prevent hearing damage or equipment damage.
• Do not use the speaker outdoors in wet or damp conditions.

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warranty Information

This product is warranted against defects in material and workmanship for ninety (90) days from the original purchase date. This warranty covers repair or replacement of defective products or components. The original purchaser is responsible for return shipping costs. This warranty does not cover normal wear and tear, damage from misuse, accidents, or unauthorized alterations. Proof of purchase is required for warranty claims. For service assistance, contact Curtis International Ltd. at 1-800-968-9853 or support@curtiscs.com.