Heyday Foldable 3-in-1 Charging Station

Product Overview

This foldable 3-in-1 charging station from Heyday is designed to efficiently charge your compatible devices, including smartphones, wireless earbuds, and smartwatches. It features a versatile design that can be used in a folded or unfolded state.

Key Features and Components

Included:

• Wireless charger with Qi2.0 charger
• USB-C to USB-C charging cable

Charging Capabilities:

• Qi2.0 charging stand: up to 15W
• Watch charging stand: up to 5W
• Earbud case charger: up to 5W

Indicators for Earbud Case Charging Base:

• Solid red: device is charging
• Solid white: device is fully charged
• Flashing red: foreign object detection (indicates potential overheating or damage; remove foreign objects immediately)

Quick Tips for Optimal Charging

• Alignment: Center your devices on the charging surfaces for the fastest and most efficient charge.
• Cases: Thick cases or certain materials may interfere with Qi2.0 and wireless charging. Remove cases for best results.
• Device Compatibility: Not all devices support Qi2.0 or wireless charging. Consult your device's user manual if unsure.
• Cable Usage: Use the provided USB-C cable for optimal high-speed wireless charging. Using a different cable may result in slower charging speeds.

Charging Instructions

1. Place the charger on a stable, flat surface.
2. Fold the charger into a triangle and raise the watch charging stand for use, or use it flat without folding or raising.
3. Plug the USB-C cable into the charger and the other end into a USB power supply (minimum DC 9V 3A; use a UL-compliant power supply).
4. Place your device onto the correct charging surface and align it with the center. If not aligned properly, the device may not charge.
5. Remove credit cards or any cards with magnetic strips before charging to prevent damage.
6. Charge time may vary by device.

Troubleshooting

If you're having issues charging:

• Ensure devices are properly aligned on the charging surfaces.
• Verify that the USB-C cable is securely plugged into the charger and the power supply.
• Remove any interfering cases or accessories.
• For Apple Watch, ensure it is placed on the designated watch charging stand.
• If the device is not aligned, it may not charge.

Need Help?

Contact Heyday support at 1-833-TGT-Tech or 1-833-848-8324.

Safety Precautions

• Remove credit cards and other cards with magnetic strips to prevent damage.
• Keep the charger away from heat and direct sunlight.
• Do not modify or repair the device yourself.
• Avoid using the charger in high temperatures or extreme weather conditions.
• Clean the device with a soft, dry cloth only. Do not use chemical detergents.
• Immediately unplug the charger from its power source if it becomes wet.

Regulatory Information

FCC ID: 2A023-QIC28 Model: QIC28

Input: 9V 3A, 12V 2.91A

Qi2.0 Charging Stand Output: 15W

Apple Watch or Airpods Output: 5W (for each)

Made in: Vietnam

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer: Target Corp. Mpls. MN, 55403 Phone: 612-304-6073

For repair information and parts, contact the original manufacturer at customersupport@gemsfindyours.com.