Product Overview
This document provides information for the heyday wireless speaker, model BTSP03S.
Features and Operation
Included in the Box
- Bluetooth Speaker
- Micro USB charging cable
Front Panel Description
The front of the speaker features several controls and indicators:
- Volume/Track Buttons: '+' and '-' buttons. Press to increase/decrease volume. Hold to skip to the next/last track.
- Mode Button: Press to play/pause audio. Hold to unpair Bluetooth. Press to initiate repair.
- Power Button: Hold to turn the speaker on or off.
- Indicator Light: Displays pairing and charging status.
Back Panel Description
The back of the speaker includes:
- Charge Port: For connecting the Micro USB charging cable.
- Reset Button: For resetting the device if needed.
Pairing Instructions
- Power on the speaker. The indicator light will flash white rapidly.
- On your phone, navigate to Bluetooth settings and select "HEYDAY SPEAKER 03" to pair.
- Once paired successfully, the indicator light will turn solid white, and you will hear a chime.
Indicators
- Flashing Red: Low Battery
- Solid Red: Charging
- No Red Light: Fully Charged
- Rapid Flashing White: Pairing Mode
- Solid White: Bluetooth Connected
Audio Cues
- Ascending Tones: Power on
- Descending Tones: Power off
- Three Rapid Tones: Ready to pair
- Single Chime: Paired
- Two Rapid Dings: Low battery
- Quick Ascending Tone: Maximum Volume
- Quick Descending Tone: Minimum Volume
Specifications
Dimensions: 102mm x 142mm
Material: 157g coated paper
Charging:
- Full charge requires approximately 2.5-3.5 hours.
- Charging is complete when the red light turns off.
- Connect the Micro USB end of the charging cable to the speaker's DC 5V port.
- Connect the USB end of the charging cable to a DC 5V USB power supply.
TWS (True Wireless Stereo) Pairing
You can pair two of these speakers together for true stereo sound.
- Disconnect your phone from the speaker's Bluetooth, or hold the play/bluetooth button to enter pairing mode.
- Place the speakers near each other and press the mode button on both speakers to enter TWS pairing.
- The speakers will automatically pair to one another. You will hear a chime when they are paired.
- After pairing, use your device to connect to "HEYDAY SPEAKER 03".
- Note: Pairing multiple speakers does not rely on the "Dual Audio" feature of newer phones.
Troubleshooting
- Speaker not working: Turn the speaker on and off to reset.
- Speaker won't turn on: Recharge the battery and try again.
- Speaker won't charge: Ensure the power supply is working, provides 5V/1A, and is not damaged.
- No sound or device not appearing: Check if the speaker is paired to another device. If so, unpair it and re-pair with your desired device.
Need Some Help?
If you have questions or comments, please contact Target Corp.:
- Call: 877-698-4883 or 877-MyTgtTech
- Online: TargetTechSupport.com
Safety Precautions
- The speaker is splash resistant; do not submerge it under water.
- Do not modify or attempt to repair this device yourself.
- Avoid use in high temperatures or extreme weather conditions.
- Do not use chemical detergents to clean the device; use a soft, dry cloth.
Compliance Information
FCC ID: 2A023-BTSP03S
Model: BTSP03S
Input: 5V Max 1A
Manufacturer: Target Corp., Mpls. MN, 55403
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference and acceptance of received interference. Unauthorized modifications may void the user's authority. This equipment has been tested and complies with Class B digital device limits under Part 15 of the FCC Rules, designed for reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, or connecting to a different circuit. The device meets general RF exposure requirements and can be used in portable conditions without restriction.
