MagSafe + Wireless charger Stand

Product Overview

This document provides information about the Heyday MagSafe + Wireless charger Stand, model QIC44. It covers quick tips, included components, indicator lights, setup instructions, charging procedures for MagSafe devices and earbud cases, troubleshooting, safety precautions, and regulatory compliance.

Visual Description

Front View: The front of the stand features a circular MagSafe charging pad at the top, designed to magnetically attach compatible devices. Below this is a smaller circular wireless charging pad for Qi-compatible devices. At the base, a 'wireless charging indicator' light is present.

Back View: The rear of the stand includes an adjustable ball joint that allows for tilting and positioning the charging head. The base of the stand is equipped with a USB-C port for power input.

Quick Tips

The device should stick firmly when MagSafe charging.
Thick cases, as well as some materials, can interfere with MagSafe/wireless charging.
This is a high-speed magnetic charging stand. For optimal performance, use the Power Delivery wall plug that was packaged with it. Using a different power source may charge your device at a slower speed.

Included

Wireless charger with MagSafe charger
USB-C to USB-C charging cable
Power Delivery wall plug

Indicators - Wireless charger only

Solid Red ? - Charging your device
Solid White ⚪ - Fully charged
Flashing Red ? - Foreign object detection. Pieces of metal or other materials may cause overheating and damage your charger or device; remove them immediately.

Charging - Set Up

Place the charging stand on a sturdy, flat surface.
Connect the Power Delivery wall plug to the wall outlet using the USB-C cable.
If you need to use a different power source, ensure it is a USB power supply of DC 9V 3.0A minimum ⚠️ warning: please use a UL-compliant power supply. (? note: this product does not support the Quick Charge protocol; it is recommended that users choose a PD charger with no less than 20W for power supply)
Use the adjustable ball joint to easily adjust the MagSafe charger to your preferred viewing angle.

Charging - MagSafe

Place your MagSafe compatible device onto the MagSafe charger. The device will stick to the charging stand, and the screen will indicate that it is charging. (? note: MagSafe® compatible devices can be placed vertically or horizontally)
Remove credit cards or any card with a magnetic strip to prevent damage to the cards before charging.
Charge time will vary by device.

Charging - Earbud Case

Place your earbud case onto the wireless charger, face up, and align the center of the case with the cross on the wireless charger. The device may not charge if not aligned properly.
Ensure that the earbud case lid is closed.
The wireless charging indicator light will turn solid red ? to indicate it is charging.
Charge time will vary by device.

Troubleshooting

If you're having issues charging, use the tips below to help:

✔️ When the devices are properly aligned, the wireless charger indicator light will turn red and/or the MagSafe devices charging screen will appear.
❌ If the wireless device is not aligned properly, the indicator light will not turn on; if the MagSafe device will not stick to the charging pad, remove the case and try again.
❌ Does not charge Apple Watch.

Double-check that the USB-C cable and Power Delivery wall plug are plugged in.
Certain cases may interfere with MagSafe®/wireless charging; remove the cases for best results.
Double-check the placement of the devices on the chargers. For best results, the center of the devices should be on the center of the chargers.
MagSafe charging is compatible with iPhone 12 and newer, as well as other Qi-enabled devices. Please consult your device's user manual if you are unsure if your device is compatible.
Wireless earbud case charging is compatible with AirPods with Wireless Charging Case, AirPods Pro, and other Qi-enabled devices. Please consult your device's user manual if you are unsure if your device is compatible.

Need Some Help?

Can't get it to charge? Just have a question?

? Call us at: 877-698-4883 or: 877-MyTgtTech

✉️ E-mail us at: TargetTechSupport.com

Safety

Remove credit cards and other cards with magnetic strips to prevent damage to the cards.
Keep the charger away from heat and direct sunlight.
Do not modify or repair this device.
Do not use in high temperatures or extreme weather.
Do not use chemical detergents to clean your device; use a soft, dry cloth.
Immediately unplug it from its power source if it gets wet.
Remove the protective film on the Power Delivery wall plug before using.

FCC Information

FCC ID: 2A023-QIC44

Model: QIC44

Input: DC9V/3.0A

Phone Charging Output 1: MagSafe Charger 15W

AirPods Charger Output 2: 5W

Made in Vietnam

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer/Distributor: Target Corp. Mpls. MN, 55403

Phone: 612-304-6073

	heyday 3-in-1 Multi-Charger with Qi2.0, Apple Watch & AirPods Charging - Model QIC37M User guide for the heyday 3-in-1 Multi-Charger (Model QIC37M). Includes setup instructions, quick tips, charging indicators, troubleshooting advice, safety precautions, and FCC compliance details for wireless charging of phones, Apple Watches, and AirPods.
	Heyday Wireless Charger Pad User Guide This guide provides instructions and troubleshooting tips for the Heyday Wireless Charger Pad (Model: QIC36). Learn how to use, charge, and maintain your wireless charger.
	Heyday Foldable 3-in-1 Charging Station User Guide A guide to using the Heyday foldable 3-in-1 charging station, including setup, troubleshooting, and safety information. This charging station supports wireless charging for phones, earbuds, and watches.
	3-in-1 Multi-Charger User Guide A comprehensive guide to the 3-in-1 multi-charger, including setup, charging, troubleshooting, and safety information. This charger supports MagSafe, wireless earbud charging, and Apple Watch charging.
	RF Exposure Test Report for Chug Inc. 3-in-1 Multi-Charger (QIC37) This report details the RF exposure test results for the Chug Inc. 3-in-1 multi-charger, model QIC37, FCC ID 2A023-QIC37. The tests were conducted by Shenzhen Microtest Co., Ltd. according to FCC standards.
	Heyday ANC Headphones with Ambient Mode: User Guide and Features Comprehensive guide to Heyday ANC Headphones, covering active noise cancellation, ambient mode, charging, pairing, troubleshooting, and safety information.
	heyday Wireless Speaker BTSP03S User Guide and Features Detailed user guide for the heyday BTSP03S wireless speaker. Learn about pairing, TWS stereo sound, troubleshooting, safety guidelines, and specifications. Includes product features and operation instructions.
	Heyday BTSP17 Wireless Speaker User Manual and Safety Information Comprehensive guide for the Heyday BTSP17 wireless speaker, covering charging, TWS pairing, troubleshooting, safety precautions, and indicator lights. Includes FCC compliance information.