LED2022-24KEY LotusLantern APP Manual

This document provides a comprehensive guide to the LotusLantern mobile application for controlling LED strips, including its features, operation, and regulatory compliance information.

Remote Control Functions

The LED2022-24KEY comes with a remote control for basic operations:

AUTO: Activates automatic loop mode and controls on/off lighting.
ON/OFF: Powers the LED strip on or off.
MODE+/-: Cycles through different lighting modes.
SPEED+/-: Adjusts the speed of dynamic lighting effects.
R, G, B Buttons: Shortcut buttons for static single colors (Red, Green, Blue). Pressing them displays the corresponding color.
W Button: Selects white light.
COLOR Button: Cycles through 16 preset colors.
Timed 1/2/3/4 hours off lights: Sets a timer for the LED strip to automatically turn off after 1, 2, 3, or 4 hours.
Brightness+/-: Adjusts the brightness level of the LED strip.
Lock Symbol [Lock]: Locks the remote control. Only the power switch remains active; other buttons are invalid. Pressing the switch again unlocks the remote.

Note: Turning the control knob (MODE/SPEED/Brightness) to its limit will result in a flashing white light prompt.

LotusLantern APP Overview

1. Software Overview

1.1 Overview

LotusLantern is a mobile application designed for both iOS and Android devices to control LED strips via Bluetooth. It offers a convenient, powerful, and scalable alternative to traditional control methods like infrared or RF remotes. The app allows users to control color, brightness, and color temperature, set various flash modes, and synchronize lights with music.

1.2 Features

Adjust color for RGB LED strips with 60,000 color options, controlling color and brightness.
Adjust monochrome LED strips for brightness and color temperature.
Synchronize light color and brightness with music rhythm or sound playback devices.
Multiple setting modes for color changes and control without a mobile device (referring to remote control functions).
Long-distance control with omni-directional antenna and multi-to-many group control capabilities.
Automatic reconnection upon successful initial connection.

1.3 Performance

The LotusLantern APP is user-friendly and highly compatible with most smartphones (over 95% compatibility verified). It is lightweight, consumes minimal system resources, and requires low mobile configuration. Control delay is minimal, providing a smooth and responsive user experience.

2. Operating Environment

The LotusLantern APP requires mobile devices running Android 4.3 or later, and iOS 8.0 or later. Mobile phone configuration requirements are not restrictive.

3. Instructions

The download and usage methods for Android and iOS versions are identical. The following instructions use the Android version as an example.

3.1 APP Download

Users can download the "LotusLantern" APP by scanning the provided QR code using a browser or any QR code scanning tool. The QR code links to download pages for both iOS and Android systems.

3.2 App Operation

Upon launching the LotusLantern APP:

Bluetooth Connection: If Bluetooth is not enabled, the app will prompt for permission to enable it. Users should tap [Allow].
Main Interface (Color/Brightness):
- Tap to display the lamp list.
- Use the color wheel to select colors.
- View RGB values.
- Control the lamp switch button.
- Adjust colors manually.
- Shift between different interface views.
Lamp List: View connected lamps and manage groups. The app supports Bluetooth auto-connection after searching for devices.
RGB Manual Adjustment: Fine-tune color, speed, and brightness.
Mode Interface: Scroll through various modes such as White, Strobe, Flash, Static Red, and Static Blue. Adjust the speed of these modes.
Music Rhythm Interface: Synchronize LED strip colors and brightness with music. This can be achieved using the product's built-in microphone or the device's microphone. Features include play/pause, next/previous song, and access to a music list.
Online Music Interface: Similar to the music rhythm interface, but specifically uses the phone's microphone for music synchronization.
Microphone Rhythm Interface: Allows switching between the phone's microphone and an external microphone. Users can adjust the microphone sensitivity to match the sound and enable/disable the Light-On function with repeat settings.
Schedule Interface: Set specific times for the lights to turn on (Light-On) and turn off (Light-Off), with options for repeat settings and single activation.
Modify Pin Sequence Interface: Allows users to change the color of specific lines (pins) and save the new assignment.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

	LotusLantern APP Manual for LED Strip Control A comprehensive manual for the LotusLantern mobile application, detailing its features for controlling LED strips via Bluetooth. Covers software overview, app operation, color and brightness adjustments, music synchronization, and scheduling.
	LotusLantern APP Manual: Control Your LED Strips with Your Smartphone A comprehensive guide to using the LotusLantern mobile application for controlling LED strips. Learn how to adjust colors, brightness, music synchronization, and more.
	LotusLantern App User Manual for LED Strip Control User manual for the LotusLantern mobile application, detailing its features, operating environment, and instructions for controlling LED strips via Bluetooth. Covers app download, operation, color adjustment, music synchronization, and scheduling.
	LotusLantern APP Manual: Control Your LED Strips with Your Smartphone A comprehensive guide to using the LotusLantern mobile application for controlling LED strip lights. Learn how to adjust colors, brightness, set lighting modes, sync with music, and manage schedules via Bluetooth.
	LotusLantern App User Manual: Control Your LED Strips User manual for the LotusLantern mobile application by Zhongshan Minghui Electronic Technology Co., Ltd. Learn how to control RUYILIGHT LED strip lights, adjust colors, brightness, and sync with music. Features include long-distance control and multiple modes. Compatible with Android and iOS.
	LotusLantern APP Manual for Smart Controller A comprehensive manual for the LotusLantern APP, detailing its features, operation, and compatibility for controlling LED strips via smart devices. Includes instructions for app download, operation, and FCC compliance information for the KU-PSJ-603020 Smart Controller.
	LotusLantern APP Manual: User Guide and Features A comprehensive guide to the LotusLantern APP, detailing its features, operation, and connectivity for smart lighting control. Includes FCC compliance information.
	LotusLantern APP Manual for LED 5050 RGB Strips A comprehensive guide to using the LotusLantern mobile application for controlling LED 5050 RGB strip lights, covering app features, operation, and technical specifications.