Hikvision DS-PDWL-E-WE Wireless Water Leak Detector

1. Appearance

The detector consists of the following components:

• Indicator: Visual feedback for device status.
• Extension Cable: For connecting the probe.
• Tamper Button: Detects unauthorized opening of the device.
• Probe: The sensor that detects water.
• Learn button: Used for device enrollment.

2. Enrollment

Refer to the user manual for detailed enrollment procedures. The process typically involves scanning a QR code or using a mobile application.

3. Installation

Proper installation ensures optimal performance and signal strength.

Signal Strength Check

Before installation, check the signal strength to ensure reliable communication with the hub or control panel.

Detector Installation Methods

The detector can be installed in two primary ways:

a. Stand Mounting

Place the detector on a stable surface using its stand.

b. Wall Mounting

Secure the detector to a wall using either:

• Screws (provided or appropriate for the wall type).
• Sponge tape (adhesive backing for quick mounting).

4. Testing

After installation, perform tests to verify functionality.

a. Stand Mounting Test

Conduct a test when the detector is mounted on its stand.

b. Wall Mounting Test

Conduct a test when the detector is mounted on the wall.

Specifications

User Manual & Support

For more detailed information and operation help, scan the QR code provided in the original document or visit the Hikvision website.

Hikvision Official Website