Zinus Easy as 1-2-3 Assembly Instruction
Numbers must Match for Secure Assembly
Model: FPWHRL-12-2
Components
- A: Side Railsx1 set
- B: Headboard Supportx1pc
- C: Headboardx1pc
- D: Footboard Supportx1pc
- E: Slatsx2pcs
- F: Center Support Beamx1set
- G: Center Support Legsx1pc
- H: Legs for Headboard/Footboardx3pcs
- I: Slatsx2sets
- J: Screwsx10pcs
- K: Screwsx3pcs
- L: Allen Wrenchx6sets
- M: Screwsx9pcs
- N: Screwsx4pcs
- S: Screwsx8pcs
Assembly Instructions
Step 1
Attach one Side Rail (A) to the Headboard Support (B) using an Allen Wrench (L).
Step 2
Attach the other Side Rail (A) to the Footboard Support (D) using an Allen Wrench (L).
Step 3
Connect the Headboard (C) to the assembled Side Rails (A) using Screws (M) and Screws (J).
Step 4
Loosely place all Screws (S) into their locations on the Footboard Support (D) and Side Rails (A). Then, attach the Footboard Support (D) to the Side Rails (A) using Screws (E) and Screws (F).
Step 5
Loosely place all Screws (S) into their locations on the Headboard Support (B) and Side Rails (A). Then, attach the Headboard Support (B) to the Side Rails (A) using Screws (E) and Screws (F).
Step 6
Attach the Side Rails (A) to the Headboard (C) and Footboard (D) using Allen Wrenches (L).
Step 7
Attach the Center Support Beam (F) to the front and back of the bed frame.
Step 8
Attach the Center Support Legs (G) and the Legs for Headboard/Footboard (H) to the frame using Screws (K) and Screws (M).
Step 9
Place the Slats (I) across the frame, securing them with Screws (N) and Screws (J).
Step 10
Attach the remaining Slats (E) to the frame.
Step 11
The bed frame is now partially assembled with slats in place.
Step 12
The Zinus bed frame is fully assembled and ready for use.
Return Policy
Zinus believes you will absolutely love your new addition to your home, but if for some reason you want to return the product, please contact us directly before you decide to return your product to the retailer. Our Customer Service organization can answer most concerns and can assist you with any questions you may have about your new product.
Please contact us first by emailing customerservice@zinusinc.com or by submitting a request at https://support.zinus.com.
The item must be returned in good condition, in the original box, with all original proof of purchase, parts and accessories, within the time frame specified by the retailer it was purchased from.
Please visit Zinus.com for warranty information on your new product.
