Zinus Leah Bamboo Platform Bed Frame Assembly Instructions

Product Identification

Model Number: ZU-FPBNH1ZC-14-2

Product Type: Bamboo Platform Bed Frame

Components

• A: 2 pcs
• B: 1 set
• C: 2 pcs
• D: 2 pcs
• E: 2 pcs
• F: 3 pcs
• G: 2 pcs
• H: 2 pcs
• I: 2 pcs
• J: 1 pc
• K: 1 pc
• L: 2 sets
• M: 22 pcs
• N: 1 pc
• O: 8 pcs
• P: 1 pc
• S: 8 pcs
• Q: 4 pcs

Assembly Steps

Step 1: Attach component A to component B using the provided hardware.

Step 2: Attach component A to component B using the provided hardware.

Step 3: Attach components C and D to component E. Repeat for the second set.

Step 4: Attach component D to component A.

Step 5: Connect the assembled side rails (components D and E) to the headboard and footboard (components A and B) using component L.

Step 6: Attach slats (components F) to the frame using screws and washers. Ensure the correct number of slats are used (x3).

Step 7: Attach the center support beam (component G) to the frame using screws and washers. Repeat for the second center support beam (x3).

Step 8: Attach the legs (component H) to the frame.

Step 9: Attach the headboard to the frame.

Step 10: Attach the side rails (component H) to the headboard and footboard using component I.

Step 11: Attach the center support beam (component J) and side supports (component H) using components M and N.

Step 12: Attach the remaining slats (component S) to the frame. Ensure the 'UP' side of the slats is facing upwards.

Step 13: Secure the frame using components K and Q.

Step 14: Attach the center support (component N) to the frame.

Step 15: Place the remaining slats (component S) onto the frame.

Step 16: Final check of all connections and ensure all hardware is tightened.

Return Policy

ZINUS believes you will absolutely love your new addition to your home, but if for some reason you want to return the product, please contact us directly before you decide to return your product to the retailer. Our Customer Service organization can answer most concerns and can assist you with any questions you may have about your new product.

Please contact us at support@zinusinc.com for any questions on our Return Policy.

The item must be returned in good condition, in original box, with all original proof of purchase, parts and accessories, within the time frame specified by the retailer it was purchased from.

Please visit Zinus.com for warranty information on your new product.