Ufree Professional Hair Clippers & Grooming Kit

Overview

The Ufree Professional Hair Clippers Zero Gapped Cordless Hair Trimmer & Grooming Kit is a versatile grooming tool designed for men. It includes multiple attachments for various grooming needs, such as beard trimming, hair cutting, and detail grooming.

The kit features a T-blade head (Zero Gapped Detail Trimmers), a beard trimmer attachment, and a nose/ear hair trimmer head. It also comes with various precision combs for different cutting lengths.

The device is powered by a rechargeable battery and features an LED display for charge status and operational indicators.

Components

The Ufree Professional Hair Clippers and Grooming Kit includes the following components:

• 1. T-blade head (Zero Gapped Detail Trimmers)
• 2. Switch [Power Button]
• 3. LED Display
• 4. Charging Port (Type-C)
• 5. Beard trimmer attachment
• 6. Precision combs for Beard trimmer attachment (1/2/3/4/5/6/7/8/9/10mm)
• 7. Nose/ear hair trimmer head
• 8. T-blade head (Zero Gapped Detail Trimmers) comb rows (1/3/5/7mm)
• 9. Type-C charging cable
• 10. Brush
• 6. Protection cap for hair clipper
• 7. USB line
• 8. Cleaning brush

The kit also features an adjustable blade lever and a protection cap for the hair clipper.

Safety Instructions and Caution

Please read the following safety instructions carefully before using this product:

• (1) This product contains a rechargeable battery. Do not throw it into fire, use or charge it in high temperatures, and do not expose the product to excessive heat.
• (2) This product should not be used by individuals without supervision or assistance from a guardian, especially those with physical, sensory, or mental impairments, or lacking experience and knowledge.
• (3) If the power cord is damaged, discard the power cord and do not use the product.
• (4) Do not insert the charger into a household outlet or remove it from the outlet with wet hands.
• (5) Keep the product out of reach of children. Do not allow children or toddlers to use it unsupervised.
• (6) Before use, check if the hair trimmer cutting head is broken.

Charging

The charging input for this product is 5V ⎓ 1A. Ensure the power supply output matches this specification.

When charging, the digital display lights up from bottom to top. A full charge takes approximately 120 minutes, indicated by the display showing '100'. A fully charged battery provides about 180 minutes of use.

The device supports a voltage range of 110-240V.

Diagram Description (Charging): An illustration shows the hair clipper connected to a power adapter via a Type-C USB cable, with the adapter plugged into a wall socket.

Display Description

The LED display provides information on the clipper's status:

• Electricity Percentage: Displays the remaining battery life from 00% to 100%. The percentage increases sequentially during charging and decreases during use. When the display shows '05' and flashes, it indicates the need to charge. When it shows '00', the battery is exhausted, and the device will shut down.
• Oil Bottle Symbol: ? This symbol appears and flashes after the device has been used for a total of 30 minutes, reminding the user to refuel the blades with oil.
• Lock Symbol: ? To activate the travel lock, press and hold the switch for 3-5 seconds. The product will lock, and the display will flash for 3 seconds. To unlock, press and hold the switch for 3-5 seconds or connect the charger.

Cutter Assembly and Disassembly

Mounting the Limit Comb:

1. Align the limit comb with the blade edge.
2. Push forward slightly to mount it.

Disassembling the Limit Comb: Pull the limit comb firmly to remove it.

Cutter Assembly and Disassembly:

The bottom blade holes are larger than the screws. Loosen the blade screws to align the bottom blade with light.

Blade Alignment:

• The end of the top blade teeth should be approximately 1/32" to 5/64" (0.79mm to 1.98mm) back from the bottom blade. This ensures the clipper does not cut too close to the skin.
• The extreme left tooth of the top blade should cover or be to the left of the first small tooth of the bottom blade.
• The extreme right tooth of the top blade must be touching the big tooth on the bottom blade.

If blade alignment is incorrect, add a few drops of oil to the blades, turn the clipper on for a few moments, turn it off, and unplug. Loosen screws slightly and adjust. Tighten screws after alignment.

Taper Lever

Some clippers are equipped with an adjustable taper lever that changes the closeness of the cut. When the lever is in the uppermost position, the blades provide the closest cut. Moving the lever downward gradually increases the cutting length.

Cutter Cleaning and Maintenance

To maintain the clipper in peak condition, the blades should be oiled every few haircuts.

Oiling Procedure: Hold the unit so the blades are in a downward position. With the clipper running, dispense 2-3 drops of oil across the top blade.

Cleaning:

• After each use, use the provided brush to remove hair from the cutter head.
• If necessary, remove the cutter head and clean it under a faucet. Note: Only the cutter head can be cleaned. Do not immerse the whole clipper in running water.
• After cleaning, add 3 drops of lubricating oil to the left, middle, and right of the cutter teeth.

Diagram Description (Blade Alignment & Oiling): Illustrations show how to align the upper and lower blades, and how to apply oil to the blades.

Usage of Trimming Heads

T-blade head (Zero Gapped Detail Trimmers):

Equipped with 4 different size comb rows: 1/3/5/7mm. When used without a comb bar, the shortest trim length is 0.3mm. This head is suitable for oil head hairstyles, trimming and carving hair shapes, and bald heads.

Diagram Description (T-blade Head Usage): Shows examples of hairstyles achieved with the T-blade head, including oil head, intricate designs, and a bald head.

Nose/ear hair trimmer head:

For trimming nose and ear hair.

Diagram Description (Nose/Ear Hair Trimmer): Shows the nose/ear hair trimmer head attached to the clipper and its use.

Beard Trimmer Attachment

Equipped with 1 adjustable positioning comb: 1/2/3/4/5/6/7/8/9/10mm. This attachment is for trimming and styling beards and sideburns.

Diagram Description (Beard Trimmer Attachment): Shows the beard trimmer attachment with its comb, and examples of its use on a beard and sideburns.

Travel Lock Function

To lock the product for travel: Press and hold the switch for 5 seconds. The product will lock, and the display will flash for 3 seconds.

To unlock the product: Press and hold the switch for 5 seconds, or connect the charger.

Instructions for Use (Cutter Head)

To remove the cutter head: Press the top of the cutter head to remove it.

To install the cutter head: Insert the buckle foot of the cutter plate into the product slot, press the cutter plate, and buckle the cutter head.

Additional Information

The product is also referred to as "MEN'S BARBER SET" and "カットセット" (Japanese for "cut set").

The product is tested with sensitive skin and is considered "TOP QUALIFIED".