Ufree U-2216 All-in-One Hair Clipper

Overview

The Ufree U-2216 is a versatile grooming kit designed for various hair and beard trimming needs. It features multiple attachments for different styling purposes.

Components:

• 1. T-blade head (Zero Gapped Detail Trimmers)
• 2. Switch
• 3. Display
• 4. Charging port
• 5. Hair clipper head
• 6. Precision trimmer head
• 7. Nose/ear hair trimmer head
• 8. Razor head
• 9. Body hair trimmer head
• 10. Body hair trimmer head comb row 3/6/9mm
• 11. T-blade head (Zero Gapped Detail Trimmers) comb row 1/3/5/7mm
• 12. Hair clipper head comb row 3/6/9/12/15mm
• 13. Type-C charging cable
• 14. Brush
• 15. Beard trimmer attachment
• 16. Precision comb 1/2/3/.../9/10mm for Beard trimmer attachment
• 17. Base

Safety Instructions and Caution

Please read the following safety instructions carefully before using this product.

• Do not throw the product into fire, use or charge it in high temperature, or expose it to excessive heat.
• This product is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised.
• If the power cord is damaged, discard it and do not use the product.
• Do not insert the charger into a household outlet or remove it with wet hands.
• Keep the product out of reach of children.
• Before using, check if the cutting head is broken.

Charge

The charging input is 5V-1A. When charging, the digital display shows the charge level. A full charge takes 90 minutes and provides approximately 180 minutes of use.

Instructions for Use

To remove the cutter head: Press the top of the cutter head to remove it.

To install the cutter head: Insert the buckle foot of the cutter plate into the product slot, press the cutter plate, and buckle the cutter head.

Installation and removal of comb bar

Install the comb row: Align the blade with the comb row, move it to the top, press the bottom of the comb row, and buckle it into the comb row.

Removing the comb bar: Remove the comb bar by force.

Use of Trimming Heads

T-blade head

Equipped with 4 comb rows (1/3/5/7mm). Can be used for trimming T lines, hairstyles, and carving. Suitable for oil heads and bald heads. Without a comb, it can trim to 0.3mm.

Nose/ear hair trimmer head

For trimming nose and ear hair.

Razor head

For trimming beards and sideburns.

Body hair trimmer head

Equipped with 3/6/9mm comb bar for trimming body hair.

Beard trimmer attachment

Equipped with an adjustable comb (1/2/3/4/5/6/7/8/9/10mm) for trimming and styling beards and sideburns.

Precision trimmer head

For trimming eyebrows and creating lettering hairstyles.

Travel lock function

Press and hold the switch for 5 seconds to lock the product. The display will flash for 3 seconds. To unlock, press and hold the switch for 5 seconds or connect to charge.

Product Cleaning and Maintenance

After each use, use the brush to remove hair from the cutter head. For a thorough cleaning, remove the cutter head and clean it under running water. After cleaning, apply 3 drops of lubricating oil to the cutter teeth (left, middle, and right).

Note: The entire machine is waterproof and washable.

Thank you for choosing Ufree. For suggestions or questions, please contact us via email at service@ufree.net. Ufree values customer experience and will assist you promptly.