Ufree 11-in-1 Multi Grooming Kit Hair Trimmer

Product Description

The Ufree 11-in-1 Multi Grooming Kit is a versatile personal grooming device featuring a high-speed motor, washable design, sharp blades, and fast charging capabilities.

• Full size trimmer
• ON/OFF switch
• Intelligent digital display screen
• Design trimmer
• Precision trimmer
• Nose/ear trimmer
• Micro shaver
• Body trimmer
• Full size combs (a-d)
• Precision comb (e)
• Stand base
• Cleaning brush
• USB cable (5V 1A charger applicable)

Specifications

• Products: Intelligent body care kit
• Model: U-1176
• Battery type: Li-ion battery
• Charging time: 1.5 hours
• Use time: 90 minutes
• Input: AC 110-240V~50/60Hz, DC 5V 1A
• Rated power: 5W
• Standards: GB4706.1-2005, GB4706.9-2008

Getting Started

Charging Your Personal Groomer

Before first use, charge for 2 hours. Ensure the product is switched off. Connect the charging adaptor to the product and then to a USB port. The charging indicator will light up. The groomer cannot be overcharged. For extended periods of non-use (2-3 months), unplug and store. Recharge fully before reuse. To preserve battery life, allow batteries to run out every 6 months, then recharge for 14-16 hours.

How to Match the Appliance

Ways of Replacement and Installation

• Remove the heads: Push the blades in the direction of the arrow (Fig. 1-2).
• Install the heads: Align the protruding part of the blade with the body groove and press the blade in the direction of the arrow (Fig. 3-4).
• Remove full size trimmer combs: Lift from the bottom of the combs (Fig. 5-6).
• Install full size trimmer combs: Align the guide comb (3/6/9/12mm) with the head and press down on the bottom of the guide comb (Fig. 7-8).
• Install adjustable precision comb: Slide the comb from top to bottom of the head, adjustable in 4 levels from 1-4 mm (Fig. 9).
• Remove foil head: Press the buttons on both sides and push forward to remove (Fig. 11).
• Adjust body trimmer lengths: The body trimmer head includes 3mm/6mm/9mm; slide the head up and down to adjust lengths (Fig. 10).

How to Use

• To define the beard/moustache line: Hold the groomer with the precision trimmer blade facing you. Start at the edge of the beard/moustache line and gently lower the trimmer blade onto your skin. Use motions towards the edge to trim (Fig. 17-18).
• Trimming edge of sideburns: Hold the groomer with the precision trimmer blade facing you. Start at the edge of the sideburn, with blades lightly against skin, use motions towards the edge to trim (Fig. 19-20).
• To thin and taper the beard/moustache: Attach a guide comb to the full size trimmer. Start with the maximum trimming length. Turn the unit on. Place the flat top of the trimmer comb against the skin. Slide the groomer through the hair, repeating from different directions. If hair builds up, switch off, remove comb, and clean (Fig. 21-22).
• To remove hair from nose and ear: Attach the nose trimmer attachment. Gently insert the groomer into the nostril or ear. Move the groomer in and out and rotate. Avoid inserting the cutting unit more than 6mm (Fig. 23).
• Using the micro shaver trimmer: Attach the micro shaver trimmer. Hold the groomer at a 45-degree angle to your face. Use short, controlled movements to shave around your beard/moustache. Stretch your skin with your free hand to help hair stand upright. Note: The micro shaver is for detail areas, not the entire face (Fig. 24).

Tips for Best Results

• Beard, moustache, and sideburn hairs should be dry.
• Avoid using lotions before grooming.
• Comb hair in the direction it grows.
• Remove the trimmer comb attachment for defining hairline edges, trimming the nape of the neck, or trimming the beard line on the front of the neck.

Care for Your Personal Groomer

Cleaning and Maintaining Your Personal Groomer

After each use:

1. Turn the personal groomer off.
2. Gently brush away hairs or rinse the guide comb and trimmer blade under warm water.

Cleaning Cautions

• Only the guide comb attachment and trimmer blade may be removed for cleaning.
• Clean with a soft brush (like the one supplied).
• Use only the supplied light-grade oil or sewing machine oil on the blades.
• Do not use harsh or corrosive cleaners.
• The product can be washed all over, but dry water droplets at the charging port before charging.

Storage

• Store in a moisture-free area.
• Do not store above 140°F (60°C).
• Do not wrap the charging cord around the appliance.

Important Safety Instructions

Warning: To reduce the risk of burns, electrocution, fire, or injury:

• Never leave an appliance unattended when plugged in.
• Keep the power plug and cord away from heated surfaces.
• Ensure the power plug and cord do not get wet.
• Do not plug or unplug with wet hands.
• Do not use with a damaged cord. Contact international service centers for replacement.
• Charge, use, and store between 15°C and 35°C.
• Always unplug from mains when cleaning.
• Only use supplied parts.
• Keep out of reach of children. Use by persons with reduced capabilities requires supervision or explicit instructions.

Protect the Environment

Do not dispose of the trimmer in household waste at the end of its life. Disposal can occur at service centers or appropriate collection sites. Do not put batteries in fire or mutilate them, as they may burst or release toxic material. Hand in the appliance at an official collection point for recycling to help preserve the environment (Fig. 25).

Battery Removal

The battery must be removed before scrapping the appliance. Dispose of the battery safely.

1. Unplug groomer from outlet.
2. Remove the rear groomer cover by prying the rubber panel with a flat head screwdriver. Pry the ON/OFF switch. Unscrew and pry the upper housing to expose batteries.
3. With wire cutters, clip the wires leading to the batteries.
4. Remove batteries and contact local authorities for proper disposal (Fig. 26).

Thank you for shopping at Ufree. For suggestions or questions, please email service@ufree.net. Ufree values customer experience and will assist you promptly.