Crestron DM Lite HD-RXC-101-C-1G-E-B-T Receiver

The Crestron DM Lite HD-RXC-101-C-1G-E-B-T is a wall plate receiver designed to extend HDMI®, RS-232, and IR signals over a single CAT5e (or higher) twisted pair cable when paired with a DM Lite transmitter.

Key Features

• Pairs with a DM Lite transmitter
• Extends HDMI, RS-232, and IR signals
• Supports 4K and UHD resolutions up to 130 ft (40 m)
• Supports HD 1080p resolutions up to 230 ft (70 m)
• Handles 3D video and Deep Color
• Supports advanced audio formats including Dolby Atmos® and DTS:X®
• HDCP 2.2 compliant
• Passes CEC and EDID signals
• Installs in a single-gang U.S. electrical box
• Decorator-style faceplate sold separately
• Powered by the transmitter over the link cable

Overview

The HD-RXC-101-C-1G-E-B-T is part of the DM Lite family, offering a versatile solution for extending video and audio signals. It supports extension of RS-232 and IR control signals in both directions. The receiver is designed for single-gang electrical box mounting and is powered by the paired transmitter.

Note: This product is a pass-through device and does not offer programmable functionality. The RJ-45 link port is exclusively for connecting to a single DM Lite transmitter.

Specifications

Video

Note: Custom resolutions are supported at pixel clock rates up to 300 MHz.

Audio

Communications

Connectors

• IR IN/OUT: (1) 4-pin 3.5 mm detachable terminal block
• HDMI OUT: (1) HDMI Type A connector, female
• COM: (1) 3-pin 3.5 mm detachable terminal block (RS-232)
• FROM TX (DM Lite, Rear): (1) 8-pin RJ-45 connector, female, shielded
• 24 VDC 1.25A (Rear): (1) 2-pin 3.5 mm detachable terminal block (Power Input)

Note: A power pack is not included. When paired with a surface-mountable transmitter, the 24 VDC input is not used; power is supplied via the DM Lite link cable.

Indicators

• PWR: Green LED (Operating power status)
• HDMI OUT: Green LED (HDMI output signal presence)
• FROM TX (DM Lite):
  • Green LED (DM Lite link status)
  • Amber LED (Valid video signal)

Power

Note: Power pack is required only when paired with a wall plate transmitter. When paired with a surface-mountable transmitter, the transmitter's power pack powers both units.

Environmental

• Temperature: 32° to 104° F (0° to 40° C)
• Humidity: 20% to 90% RH (non-condensing)

Construction

• Composition: Metal housing and bracket with black polycarbonate front label overlay
• Mounting: Mounts in a 1-gang (or larger) 2-1/4 inch deep U.S. electrical box or plaster ring (not included)
• Faceplate: Requires a decorator-style faceplate (FP-G series, sold separately)

Dimensions

• Height: 4.08 in. (104 mm)
• Width: 1.81 in. (46 mm)
• Depth: 1.97 in. (50 mm)
• Weight: 5.26 oz (149 g)

Compliance

• Regulatory Model: HD-RXC-101-C-1G-E-B-T
• Certifications: UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B

Maximum DM Lite Link Cable Lengths

Model

HD-RXC-101-C-1G-E-B-T DM Lite® Receiver for HDMI®, IR, and RS-232 Signal Extension over CATx Cable, Wall Plate, Black Textured

Accessories

For a list of accessories, visit the HD-RXC-101-C-1G-E-B-T product page on the Crestron website.

Notes

1. Use Crestron DM-CBL-8G or DM-CBL-ULTRA cable, or third-party CAT5e (or higher). Shielded cable and connectors are recommended for all applications to safeguard against electrical noise. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or other CATx based interfaces or networks.
2. For applications paired with a 1-gang transmitter (HD-TXC-101-C-1G-E-B-T or HD-TXC-101-C-1G-E-W-T), refer to Crestron Online Help Answer ID 1000168. Do not connect a power pack to both the receiver and transmitter simultaneously.
3. An appropriate adapter or interface cable (e.g., CBL-HD-DVI) is required to accommodate a DVI signal for the HDMI output.

Purchasing and Support

This product can be purchased from authorized Crestron dealers and distributors. Find a representative at www.crestron.com/How-To-Buy/Find-a-Representative or call 855-263-8754.

The product is covered by the Crestron standard limited warranty. Details are available at www.crestron.com/warranty.

Crestron patents are listed online at patents.crestron.com.

Information on open source software used in Crestron products is available at www.crestron.com/opensource.

Trademarks and Disclaimers

Crestron®, the Crestron logo, DigitalMedia™, DigitalMedia 8G™, DigitalMedia 8G+™, DM®, DM 8G™, and DM Lite® are trademarks or registered trademarks of Crestron Electronics, Inc. Dolby®, Dolby Atmos®, and Dolby Digital® are trademarks or registered trademarks of Dolby Laboratories. DTS®, DTS HD®, and DTS:X® are trademarks or registered trademarks of DTS, Inc. HDBaseT® is a trademark or registered trademark of HDBaseT Alliance. HDMI® and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC. UL® is a trademark or registered trademark of Underwriters Laboratories, Inc. Crestron disclaims proprietary interest in the marks and names of others.

Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.