FITUEYES TV Cart TC78-1
Model Numbers: S03C1461A/S03C1462B, S03C1463E/S03C1464F, S03C1465G/S03C1467Z
What's in the Box
- Main Cart Components:
- Part A (Wheels): x2
- Part B (Base): x4
- Part C (Vertical Supports): x2
- Part D (Bottom Shelf): x1
- Part E (Top Shelf): x1
- Part F (TV Mounting Brackets): x2
- Part G (TV Mounting Arms): x2
Hardware Included
| Hardware ID | Quantity | Description |
|---|---|---|
| M-A | x4 | M5x28mm |
| M-B | x4 | M8x10mm |
| M-C | x4 | M5x6mm |
| M-D | x4 | M4x14mm |
| M-E | x4 | M6x12mm |
| M-F | x4 | M6x14mm |
| M-G | x4 | M6x30mm |
| M-H | x4 | M8x30mm |
| M-I | x8 | M5x14mm |
| M-J | x8 | M4x30mm |
Note on TV Mounting: When attaching the TV mounting brackets (Part F) to the TV back, select appropriate screws from the hardware pack. If the TV back panel is uneven, use washers (M-H to M-J) with the screws. Multiple washers can be stacked as needed for optimal fit.
Installation Guide
Step 1: Attach Wheels to Base
Action: Insert the four wheels (Part A) into the designated sockets on the base (Part B). Secure each wheel using one M-A screw (M5x28mm).
Visual Aid Description: The diagram shows the base (labeled '1') with four circular holes. Four wheels (labeled '2') are shown being inserted into these holes. Four M-A screws (labeled 'M-A x4') are shown being used to secure them.
Step 2: Attach Vertical Supports to Base
Action: Attach the two vertical supports (Part C) to the base (Part B). Secure each support using two M-B screws (M8x10mm).
Visual Aid Description: The diagram shows the base (labeled '1') with vertical supports (labeled '3') being attached. Four M-B screws (labeled 'M-B x4') are indicated for this step.
Step 3: Attach Bottom Shelf
Action: Attach the bottom shelf (Part D) to the lower section of the vertical supports (Part C). Secure the shelf using four M-C screws (M5x6mm).
Visual Aid Description: The diagram shows the bottom shelf (labeled '4') being attached to the vertical supports (labeled '3'). Four M-C screws (labeled 'M-C x4') are shown.
Step 4: Attach Top Shelf
Action: Attach the top shelf (Part E) to the upper section of the vertical supports (Part C). Secure the shelf using four M-D screws (M4x14mm).
Visual Aid Description: The diagram shows the top shelf (labeled '5') being attached to the vertical supports (labeled '3'). Four M-D screws (labeled 'M-D x4') are shown.
Step 5: Attach TV Mounting Brackets
Action: Attach the two TV mounting brackets (Part F) to the front of the vertical supports (Part C). Secure each bracket using two M-E screws (M6x12mm).
Visual Aid Description: The diagram shows the TV mounting brackets (labeled '6') being attached to the vertical supports (labeled '3'). Four M-E screws (labeled 'M-E x4') are indicated.
Step 6: Attach TV Mounting Arms
Action: Attach the two TV mounting arms (Part G) to the TV mounting brackets (Part F). Secure each arm using two M-F screws (M6x14mm).
Visual Aid Description: The diagram shows the TV mounting arms (labeled '7') being attached to the TV mounting brackets (labeled '6'). Four M-F screws (labeled 'M-F x4') are shown.
Step 7: Mount TV to Arms
Action: Carefully lift your TV and align it with the attached TV mounting arms (Part G). Secure the TV to the arms using the appropriate hardware.
Visual Aid Description: The diagram shows a TV being placed onto the mounted arms (labeled '7').
Step 8: Secure TV to Arms
Action: Secure the TV to the mounting arms (Part G) using eight M-I screws (M5x14mm) and eight M-J screws (M4x30mm). Ensure the TV is stable.
Visual Aid Description: The diagram shows the TV secured to the arms (labeled '7') using screws (labeled 'M-I x8' and 'M-J x8').
Step 9: Part 7 Disassembly and Composition
Description: This section details the components of the TV mounting arms (referred to as 'Part 7' in diagrams) and shows a disassembly view. It identifies parts 7a (brackets), 7b, and 7c.
Visual Aid Description: Diagrams show the breakdown of the TV mounting arm assembly, labeling parts 7a, 7b, and 7c.
Step 10: Height Adjustment Guidance
Description: The adjustable range for the distance from the TV bottom to the ground is marked on Part 7 (TV mounting arms/mechanism). This allows you to choose the appropriate height. Select your desired height, make a mark on the ruler, and then disassemble and reassemble Part 7 to the back of the TV.
Visual Aid Description: Diagrams illustrate the process of marking a ruler for height adjustment on the TV mounting components.
Step 11: Attach TV Mounting Brackets to TV
Action: Select appropriate screws (M-A to M-G) and attach the TV Mounting Brackets (Part F, referred to as 7a in diagrams) to the four screw holes on the back of your TV.
Installation Methods:
- Method A1 (Flat TV Back): If the back of your TV is flat, use this method without washers. [✔️ Correct]
- Method A2 (Uneven TV Back): If the back of your TV is uneven, use this method with washers (M-H to M-J). Multiple washers can be stacked as needed. [❌ Incorrect if used on flat back]
Visual Aid Description: Diagrams show two methods (A1 and A2) for attaching brackets to a TV. Method A1 uses screws directly. Method A2 shows screws with washers (M-H, M-J) being used.
Step 12: Install Part 7b
Action: Install part 7b according to the marking on the component.
Visual Aid Description: Diagram shows part 7b being installed.
Step 13: Attach Part 7b to TV
Action: Attach the installed part 7b to the TV.
Visual Aid Description: Diagram shows part 7b being attached to the TV.
Step 14: Mount TV Unit to Cart
Action: Mount the assembled TV unit onto the cart structure.
Visual Aid Description: Diagram shows the TV unit being attached to the cart.
Step 15: Secure TV to Cart
Action: Secure the TV to the cart assembly.
Visual Aid Description: Diagram shows the TV being secured to the cart.
Step 16: Final Adjustments
Action: Make any final adjustments to ensure the TV is level and secure.
Visual Aid Description: Diagram shows final checks or adjustments.
Step 17: Completed Assembly
Description: The TV cart is now fully assembled with the TV mounted.
Visual Aid Description: Diagram shows the final assembled TV cart with a TV mounted on it.
