FITUEYES FT-E2651WB TV Stand with Mount
Thank you for choosing FITUEYES. Please read the instructions carefully before installation and keep them properly.
Customer Information
Dear customer, thanks for your purchase in our store. If you have any questions, please contact us with the following details:
- Purchase platform & order number
- Model number & Instruction version#
- Detailed photo (faulty part, damaged part, or if parts are missing, please circle them on the manual instruction)
- Specify if you require a refund or part replacement.
FITUEYES will reply as soon as possible, usually within 24 hours.
What's in the Box
Check all parts before assembly. If any parts are missing or damaged, please contact FITUEYES Customer Service. Never use damaged parts!
Hardware List:
- A x6
- B x3
- C x8
- D x2
- E x6
- F x2
- G x1 (4mm Allen Wrench)
- G x1 (5mm Allen Wrench)
- Magic tape tie
Mounting Hardware for TV:
- M-A x4
- M-B x4
- M-C x4
- M-D x4
- M-E x4
- M-F x4
- M-G x4
- Spacer (for irregular-backed TVs)
Diagrams:
The document includes diagrams illustrating the parts and assembly steps. These diagrams show the different components labeled with letters (A-G) and numbers (1-11), as well as specific hardware (M-A to M-G) used in each step.
How to Choose Mounting Screws for Your TV
For flat-backed TV: Use the appropriate length screws (M6 or M8) with a washer and bracket. Ensure the screw is not too long or too short.
For irregular-backed (Rounded) TV: Use the appropriate length screws (M6 or M8) with a washer, spacer, and bracket. Ensure the screw is not too long or too short.
Easy to Install
Follow the numbered steps and diagrams for assembly.
- Attach the Base: Secure Part A (x6) to the base, positioning it 0.5 inches away from the edge.
- Assemble the Pole: Attach Part 4 to the base using Part B (x3) and Part 1. Use the 5mm Allen Wrench (G x1).
- Adjust Height: The pole has 3 height adjustment options (2.55" / 65MM). Insert Part C (x4) into the appropriate holes. Use the 4mm Allen Wrench (G x1).
- Attach Brackets to Pole: Secure the TV brackets (Part 6 x2) to the pole using Part C (x4). Use the 4mm Allen Wrench (G x1).
- Attach TV Brackets to TV:
- For flat-backed TV: Use M-A x4 or M-C x4, and M-F x4.
- For irregular-backed (Rounded) TV: Use M-B x4 or M-D x4, and M-E x4.
- For mounting holes not in the same plane: Use M-B x4 or M-D x4, and M-E x4.
- For TV with wires: Use M-B x4 or M-D x4, and M-G x4.
- Attach Shelves:
- Step 1: Attach Part 11 (x2) to the pole using Part D (x2).
- Step 2: Attach Part 10 (x1) to the pole using Part D (x2).
- Step 3: Secure Part 11 (x1) to the pole. Use the 4mm Allen Wrench (G x1).
- Mount TV to Stand:
- Step 1: Attach Part 7 to the TV brackets using Part E (x4).
- Step 2: Align the TV with the brackets on the stand.
- Step 3: Secure the TV to the brackets using Part F (x2).
- Final Adjustments: Ensure all screws are tightened and the TV is stable.
Safety Precautions
- Do not attempt to move this furniture without first removing all equipment.
- Death or serious injury may occur if children climb on the TV stand. A remote control or toys placed on the stand may encourage a child to climb, leading to the stand tipping over.
- Always use the correct screws and hardware as indicated in the instructions.
- If any parts are missing or damaged, do not proceed with assembly. Contact FITUEYES Customer Service.
