FITUEYES TV Cart Installation Guide
Model: TT206505GB
Issued: 2020.1-1
Welcome
Thank you for purchasing this FITUEYES TV Cart. Please read these instructions carefully before installation and keep them for future reference. If you have any questions, please contact us via support@fitueyes.com with the following details:
- Purchase platform & order number
- Model number & Instruction version#
- Detailed photo (faulty part, damage part, or if parts are missing, please circle it/them on the manual instruction)
We will reply as soon as we receive your message (usually within 24 hours).
What's in the Box
The following components are included for assembly:
Diagram Description: The main components include a wheeled base (1), vertical support poles (4, 5), a lower shelf (11), an upper shelf (12), TV mounting brackets (9), and various hardware pieces.
Parts List:
| Part | Description | Quantity |
|---|---|---|
| A | ST4.2x16 Screw | x16 |
| B | M8x45 Screw | x3 |
| C | M6x12 Screw | x8 |
| D | M6x55 Screw | x2 |
| E | M5x6 Screw | x6 |
| E | Bracket Piece | x2 |
| F | Velcro Strap | x2 |
| G | 4mm Allen Wrench | x1 |
| M-A | M6x14 Screw | x4 |
| M-B | M6x30 Screw | x4 |
| M-C | M8x20 Screw | x4 |
| M-D | M8x45 Screw | x4 |
| M-E | 16xΦ 8.2x1 Washer | x4 |
| M-F | 15xΦ 8x5 Spacer | x4 |
| M-G | 15xΦ 8x15 Spacer | x4 |
| Allen Wrench | 5mm | x1 |
Easy to Install
Step 1: Assemble Base and Lower Pole
Attach the four casters (2) to the base (1). Insert the lower pole (4) into the base (1) and secure it using sixteen ST4.2x16 screws (A).
Step 2: Attach Upper Pole and Height Mechanism
Attach the upper pole (5) to the lower pole (4) using three M8x45 screws (B). Attach the height adjustment mechanism (6) to the upper pole (5).
Step 3: Adjust Height and Attach TV Brackets
The stand offers three height adjustment options. Select the desired height by aligning the holes and secure the connection using four M6x12 screws (C). There are 3 height settings available, indicated by holes spaced 2.55" (65mm) apart. Choose the appropriate holes for your desired height and secure the connection.
Step 4: Attach TV Mounting Plate
Attach the TV mounting plate (9) to the mounting plate arms (10) using four M6x12 screws (C).
Step 5: Attach TV Brackets to TV
How to Choose Mounting Screws for Your TV
For flat-backed TVs: Use the appropriate length screws (M-A, M-B, M-C, M-D) with washers and brackets. Ensure the screw is not too long or too short. A short screw with a washer is shown for flat-backed TVs. ✔️
For irregular-backed (rounded) TVs: Use longer screws with spacers (M-F or M-G) and washers. A long screw with a spacer and washer is shown for irregular-backed TVs. ✔️
Diagram Description (Page 3): Illustrates selecting screws for flat-backed TVs (short screw, washer) and irregular-backed TVs (long screw, spacer, washer). It shows incorrect screw lengths with red crosses (❌) and correct lengths with green ticks (✔️).
Attaching Brackets to the TV
Scenario (a) For flat-backed TV: Attach the TV bracket arms (8) to the TV using screws (M-A x4 or M-C x4) and washers (M-E x4). Ensure correct screw length and orientation.
Scenario (b) For irregular-backed (Rounded) TV: Attach the TV bracket arms (8) to the TV using screws (M-B x4 or M-D x4), spacers (M-F x4 or M-G x4), and washers (M-E x4). Ensure correct screw length and orientation.
Scenario (c) For mounting holes not in the same plane at the back of TV: Use screws (M-B x4 or M-D x4), spacers (M-F x4 or M-G x4), and washers (M-E x4).
Scenario (d) For the back of TV with wires: Use screws (M-B x4 or M-D x4), spacers (M-F x4 or M-G x4), and washers (M-E x4).
Diagram Description (Page 4): Illustrates four methods for attaching TV brackets to the back of a TV, covering flat-backed, irregular-backed, non-planar mounting holes, and TVs with wires. It shows the correct (✔️) and incorrect (❌) ways to attach the brackets using various screws and spacers.
Diagram Description (Page 7 & 8): Shows detailed steps for attaching the TV bracket arms (8) to the TV. The bracket arms are attached to the VESA mounting holes on the back of the TV. The diagram on page 7 indicates a VESA pattern with holes spaced 2.75" (70mm) apart. The diagrams on pages 7 and 8 show the bracket arms being attached using screws (E x4) and secured with Velcro straps (F x2).
Step 6: Mount TV to the Stand
Carefully lift the TV and hook the TV bracket arms (8) onto the TV mounting plate (9). Secure the TV using the provided safety straps or screws as indicated in the diagrams.
Diagram Description (Page 7): Illustrates hooking the TV with attached brackets onto the main mounting plate. Safety straps (F x2) are used to secure the TV to the plate.
Diagram Description (Page 8): Shows detailed steps for attaching the TV bracket arms (E) to the TV and then mounting the TV onto the stand. The process involves aligning the arms with the mounting plate and securing them.
Step 7: Attach Shelves
Attach the lower shelf (11) and upper shelf (12) to the stand. The lower shelf is secured using four M6x55 screws (D) and the upper shelf is secured using four M5x6 screws (E).
Diagram Description (Page 7): Shows the lower shelf (11) being attached to the vertical poles using screws (D x4). The upper shelf (12) is attached using screws (E x4 - this quantity differs from page 3's E x6 M5x6, but matches page 7's diagram). Let's use E x4 for the upper shelf as per page 7 diagram.
Step 8: Final Adjustments
Ensure all screws are tightened. Adjust the TV angle and position as desired. The stand is now ready for use.
