Franke Kitchen Faucet Installation and Service Manual

Introduction

This document provides comprehensive installation and service guidance for Franke kitchen faucets, including technical specifications, maintenance procedures, and important safety information. The primary language of this manual is English, with information also available in numerous other languages.

For detailed product information and support, please visit the official Franke website: www.franke.com ?

Faucet Types and Dimensions

The manual illustrates two primary faucet models:

Icon Swivel Faucet

This model features a swivel spout allowing for a 120° range of motion. Key dimensions include a height of 341 mm, a reach of 287 mm, a mounting hole diameter of Ø35 mm, and a base diameter of Ø50 mm. It connects via G3/8" hoses.

Refer to diagram on page 3 for detailed dimensions.

Icon Pull Out Faucet

This model offers a pull-out spout for enhanced functionality. It has a height of 334 mm, a reach of 237 mm, and a spout height of 260 mm. The mounting hole diameter is Ø33.5 mm, with a maximum countertop thickness of 45 mm. The pull-out hose length is 1700 mm. It connects via G3/8" hoses.

Refer to diagrams on pages 3 and 4 for detailed dimensions.

Installation Guide

Follow these steps for proper installation:

Step 1: Mounting the Faucet

Insert the faucet body through the designated hole (Ø35 mm) in the countertop. Ensure the countertop thickness does not exceed the specified limit (40 mm for Swivel, 45 mm for Pull Out).

Illustrated on pages 5 (A) and 6 (B).

Step 2: Securing the Faucet

Use the provided mounting bracket and tighten it securely. For the Swivel model (A), use a 2.5 mm Allen key. For the Pull Out model (B), use a wrench (approx. 40 mm fitting).

Illustrated on pages 5 (A) and 6 (B).

Step 3: Connecting Water Supply

Connect the flexible hoses to the faucet inlets and the water supply valves. Ensure a minimum clearance of Rmax ≥ 50 mm is maintained. Use appropriate wrenches (19 mm for Swivel, 13 mm and 19 mm for Pull Out) for tightening connections. The pull-out hose may include a weight (approx. 420 g) and a measurement guide (60-70 mm).

Illustrated on pages 5 (A), 7 (B), and 9 (A/B).

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

Cleaning the Faucet Head and Spout

Periodically disassemble and clean the faucet head and pull-out spout components to remove any debris or mineral buildup. Use a soft cloth for cleaning and avoid abrasive cleaning agents.

Refer to diagrams on page 8 for detailed cleaning procedures.

Technical Specifications and Periodic Checks

Periodic Checks

Regularly inspect the faucet connections and shower hoses for the following:

• ? Watertightness
• ⚠️ Corrosion
• ? Mechanical damage

Important guidelines:

• ✔️ Use only original spare parts.
• ❌ Replace damp or dripping hoses.
• ❌ Replace hoses with rusty or oxidized surfaces.
• ❌ Replace hoses showing signs of mechanical damage.
• ✔️ Flush all pipes thoroughly before installation.

Operating Data

* Equal pressure is recommended.

Similar technical data and maintenance checks are provided in multiple languages within the original document.

Exploded Views

Icon Swivel Faucet Components

The following components are identified in the exploded view:

1. Component 1
2. Component 2
3. Component 3
4. Component 4
5. Component 5
6. Component 6
7. Component 7
8. Component 8

Refer to diagram on page 26.

Icon Pull Out Faucet Components

The following components are identified in the exploded view:

1. Component 1
2. Component 2
3. Component 3
4. Component 4
5. Component 5
6. Component 6
7. Component 7
8. Component 8
9. Component 9
10. Component 10
11. Component 11
12. Component 12
13. Component 13
14. Component 14
15. Component 15
16. Component 16

Refer to diagram on page 27.

Contact Information

For regional support and product inquiries, please visit www.franke.com. Local contact details are available on the last page of the original document.