POCO X7 Quick Start Guide and Safety Information

Welcome

Thank you for choosing the POCO X7. To turn on the device, press and hold the power button. Follow the on-screen instructions to set up your device. For more detailed information, please visit our official website: www.mi.com/global/service/userguide.

SIM Card

Do not insert non-standard SIM cards into the SIM card slot, as they may damage the slot. WARNING: Do not disassemble the device.

Device Overview

The device is a smartphone with side buttons for power and volume control. It supports Nano-SIM cards, which can be inserted into the designated tray.

Safety Information

General Precautions

• Use only approved cables, power adapters, and batteries to avoid fire, explosion, electric shock, or other hazards.
• The equipment is designed for use in enclosed, heated rooms with ambient temperatures between 0°C and 40°C and relative humidity not exceeding 95%.
• Do not attempt to replace the built-in battery yourself.
• Charge the device only with the provided or approved cable and adapter. Use only approved accessories compatible with your device.
• Disconnect the adapter after charging is complete. Do not charge the device for more than 12 hours.
• Dispose of batteries separately from household waste. Improper handling can lead to fire or explosion. Dispose of or recycle the device, its battery, and accessories according to local regulations.
• Do not disassemble, crush, puncture, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this can cause overheating, burns, or other injuries.
• Do not place the battery in high-temperature environments; overheating can cause an explosion.
• Keep your device dry.
• Do not attempt to repair the device yourself. Contact Xiaomi customer support or an authorized service center for any issues.
• Connect other devices according to their operating instructions. Do not connect incompatible devices.
• Ensure the power outlet is easily accessible when using AC adapters.

Specific Usage Warnings

• Do not use the phone at refueling stations, in potentially explosive atmospheres (e.g., near fuel storage, chemical plants, or areas with flammable vapors or dust), or in areas where wireless devices are prohibited by signs.
• Do not use the phone in operating rooms, emergency rooms, or intensive care units in hospitals. Always follow hospital regulations. If you use a personal medical device, consult your doctor and the device manufacturer to ensure compatibility. Maintain at least 15 cm distance between the phone and a pacemaker to avoid interference.
• Follow all safety regulations on aircraft and turn off the phone when requested.
• Use the phone responsibly while driving, adhering to traffic laws.
• Avoid using the phone outdoors during thunderstorms to prevent lightning strikes.
• Do not use the phone for calls while it is charging.
• Do not use the phone in high-humidity areas like bathrooms, as this may cause electric shock, injury, fire, or damage to the charger.

Safety Statement

Update your phone's operating system using the built-in software update feature or through authorized service centers. Using other methods may damage the device or lead to data loss and security issues.

Regulatory Information

EU Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this digital mobile phone is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification.

The device supports GSM, GPRS, EDGE, UMTS, LTE, and 5G NR, along with Bluetooth and Wi-Fi capabilities.

[CE Mark] This indicates compliance with EU regulations.

SAR Information (Specific Absorption Rate)

This device complies with EU recommendations and ICNIRP guidelines for public exposure to radiofrequency electromagnetic fields. The SAR limit for head and body is 2.0 W/kg averaged over 10 grams of tissue.

SAR testing is performed using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The device is designed to meet the SAR limits when used at a minimum distance of 5 mm from the body. For body-worn operation, use accessories that do not contain metal and maintain at least a 5 mm distance between the device and the body. Accessories containing metal have not been tested or certified for RF exposure compliance and should be avoided.

EU SAR Values: Head: 0.994 W/kg, Body: 0.992 W/kg (at 5 mm distance).

Frequency Bands and Power

This smartphone operates within the following frequency bands in the EU:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA 1/8: 25.7 dBm
• LTE 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE 42: 26 dBm
• 5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5 GHz: 5150–5250 MHz: 23 dBm, 5250–5350 MHz: 23 dBm, 5470–5725 MHz: 23 dBm, 5725–5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10 meters

5G network performance may vary by country, operator, and usage environment.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This smartphone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC SAR Information

This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR).

The FCC limit for SAR is 1.6 W/kg. This device has been tested for body-worn operation and meets FCC RF exposure guidelines when used with an accessory that contains no metal and is positioned at a minimum distance of 1.0 cm from the body. Compliance with RF exposure for body-worn accessories containing metal has not been tested or certified and should be avoided. Any accessory used with this phone in close proximity to the body should maintain a minimum distance of 1.0 cm from the body.

FCC Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used to ensure compliance with Class B limits.

Electronic Label

This device has an electronic label containing certification information. Access it via Settings > About phone > Certification, or by searching "Certification" in the settings search bar.

Model: 24095PCADG

The marking "2409" indicates that the product will be released after September 2024.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, 100085, China.

Brand: POCO

© Xiaomi Inc. All rights reserved.