POCO X7 Quick Start Guide

Getting Started

Thank you for choosing the POCO X7. To turn on your device, press and hold the power button. Follow the on-screen instructions to set up your device. For more information, visit our official website: www.mi.com/global/service/userguide

SIM Card

Do not insert non-standard SIM cards into the SIM card slot, as they may damage the slot. Warning: Do not disassemble the device.

Disposal of Electrical and Electronic Equipment

Special precautions must be taken to ensure the safe disposal of this product. This symbol indicates that this product should not be disposed of with other household waste within the EU. To prevent harm to the environment or human health from improper waste disposal and to promote the sustainable reuse of material resources, please dispose of the device responsibly. For safe recycling, please contact your local electronics collection point or the retail store where the device was originally purchased.

Important Safety Information

Before using your device, please read all safety precautions:

• Using unapproved cables, power adapters, or batteries may lead to fire, explosion, electric shock, or other hazards, or damage to the device.
• The equipment is intended for use in enclosed, heated rooms with ambient temperatures between 0°C and 40°C and relative humidity not exceeding 95%. The equipment does not require periodic maintenance during its service life.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or device.
• Charge the device only with the included or manufacturer-approved cable and power adapter. Use only manufacturer-approved accessories compatible with your device.
• After charging is complete, disconnect the adapter from the device and unplug it from the power outlet. Do not charge the device for more than 12 hours.
• Batteries should be recycled or disposed of separately from household waste. Improper handling of a battery may lead to fire or explosion. Dispose of or recycle the device, its battery, and accessories in accordance with local regulations.
• Do not disassemble, crush, puncture, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, resulting in burns or other injuries.
• Do not place the battery in environments with high temperatures. Overheating may cause an explosion.
• Do not disassemble, crush, or puncture the battery, as this may cause battery electrolyte leakage, overheating, or explosion.
• Do not incinerate the battery, as this may cause fire or explosion.
• The user must not remove or replace the battery. The battery can only be removed or repaired by the manufacturer's authorized service center.
• Keep your device dry.
• Do not attempt to repair the device yourself. If any component of the device is not functioning properly, contact Xiaomi customer support or take your device to an authorized service center.
• Connect other devices in accordance with their user manuals. Do not connect devices that are incompatible with this device.
• For AC/DC adapters, the socket-outlet should be located near the equipment and be readily accessible.

Precautions: Adhere to all applicable laws and regulations that restrict the use of mobile phones in certain situations and environments.

• Do not use the phone at refueling stations, in potentially explosive environments, including fuel-loading areas, below deck on ships, in locations where fuel or chemicals are stored or transported, or in areas where the air may contain chemicals or fine particles of sand, dust, or metal powders. Observe all posted signs that prohibit the use of wireless devices (phones or other radio equipment). Turn off your smartphone or wireless device in blasting areas, or in areas where signs instruct to turn off two-way radio or electronic devices to prevent possible interference.
• Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all hospital and medical center rules and regulations. If you use a personal medical device, consult your doctor and the device manufacturer to ensure that your phone does not interfere with the device's operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between the mobile phone and the pacemaker. This can be achieved by using the phone on the ear opposite the pacemaker and not carrying it in a breast pocket. To avoid interference with medical equipment, do not use the phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone if required by the aircraft crew.
• When driving, use your phone in accordance with traffic laws and regulations.
• To prevent lightning strikes, do not use the phone outdoors during a thunderstorm.
• Do not use the phone for calls while it is charging.
• Do not use the phone in places with high humidity, such as bathrooms. This may lead to electric shock, injury, fire, or damage to the charger.

Safety Statement

Update your phone's operating system using the built-in software update feature or by visiting authorized service centers. Updating the software by other means may damage the device or lead to data loss, security issues, and other risks.

EU Regulations

EU Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this GSM/GPRS/EDGE/UMTS/LTE/5G NR mobile phone with Bluetooth and Wi-Fi capabilities complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

Radio Frequency Exposure (SAR) Information

This device complies with the EU Council Recommendation 1999/519/EC, the ICNIRP guidelines, and the RED conformity declaration (Directive 2014/53/EU) regarding limits for specific absorption rate (SAR) for general public/uncontrolled exposure (SAR limit for head and body: 2.0 W/kg averaged over 10 grams of tissue). During SAR testing, the device was set to its highest certified power level across all tested frequency bands and placed in positions that reproduce RF exposure in close proximity to the body with no isolation and a separation of 5 mm from the body.

The device's exposure to RF is compliant with SAR requirements based on tests conducted with a separation distance of 5 mm between the device and the human body. To ensure that the RF exposure level is consistent with or below the declared level, you should keep this device at a distance of at least 5 mm from your body. When attaching the device close to your body, use a belt clip or holster that does not contain metal parts and ensures a minimum distance of 5 mm between the device and your body. The compliance of RF exposure when wearing body-worn accessories containing metal parts has not been tested or certified, and therefore, such accessories should be avoided. Use of accessories that do not meet these requirements or are not approved by the manufacturer may result in non-compliance with RF exposure guidelines.

SAR Certification Information (Highest SAR Level):

• SAR limit for 10g: 2.0 W/kg
• SAR values: Head: 0.994 W/kg, Body: 0.992 W/kg (at 5 mm distance)

Legal Information

This device can be used in all EU member states. Observe national and local regulations when using the device. Ensure that the power adapters you use comply with applicable national regulations and international and regional safety standards. Wi-Fi connectivity features (including Wi-Fi frequency bands, Wi-Fi standards, and other features approved in the IEEE 802.11 standard specifications) may vary depending on regional availability and local network support. This functionality can be enabled via OTA update if applicable.

Frequency Bands and Power

This smartphone operates in the following frequency bands only in the EU and at the maximum radio frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA 1/8: 25.7 dBm
• LTE 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE 42: 26 dBm
• 5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5 GHz: 5150–5250 MHz: 23 dBm, 5250–5350 MHz: 23 dBm, 5470–5725 MHz: 23 dBm, 5725–5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10 m

5G network performance may vary depending on the country, operator, and user's operating environment.

Federal Communications Commission (FCC) Regulations

This smartphone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This smartphone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Exposure (SAR) Information

This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. This device has been tested for body-worn operation and complies with the FCC RF exposure guidelines when used with an accessory that does not contain metal and is positioned at a minimum distance of 1.0 cm from the body. Compliance with RF exposure for body-worn accessories containing metal parts has not been tested or certified, and therefore, such accessories should be avoided. Any accessory used with this phone in close proximity to the body must be maintained at a minimum distance of 1.0 cm from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this product to ensure compliance with Class B limits of the Federal Communications Commission.

Electronic Label

This device has an electronic certification label. To view it, go to Settings > About phone > Certification, or open Settings and type "Certification" in the search bar.

Model: 24095PCADG

The marking "2409" indicates that the product will be released to the market after September 2024.

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Xiaomi may make corrections and changes to this user guide due to typographical errors, inaccuracies in current information, or improvements to software and hardware at any time and without notice. Such changes will be added to new versions of the current user guide (for detailed information, see: www.mi.com/global/service/userguide). All illustrations are for demonstration purposes only and may not accurately represent the actual device.

Intended Use

This subscriber terminal is terminal equipment for connecting to operator networks of 2G, 3G, 4G, and 5G standards for voice and data transmission, supporting various connection profiles (Wi-Fi, Bluetooth, etc.).

Power Supply

From AC power adapter with output power parameters: nominal voltage: 11V 4.1A, from rechargeable battery: 5110 mAh (typical), 5010 mAh (minimum).

Country of Manufacture

China

Installation Rules and Conditions

Device installation is carried out in accordance with the quick user guide accompanying this device.

Storage Rules and Conditions

The device should be stored in enclosed rooms, in factory packaging, at an ambient temperature of -20°C to +45°C, and relative humidity not exceeding 70%. Shelf life is 3 years. Stacking is allowed up to 10 units high.

Transportation Rules and Conditions

Transportation and carriage of the device are allowed only in factory packaging, by any type of transport, without distance limitations.

Sales Rules and Conditions

Unlimited.

Disposal Rules and Conditions

At the end of the device's service life, contact an official dealer for disposal.

Connection Rules and Conditions for Power Supply and Other Technical Means, Launch, Adjustment, and Commissioning

Carried out in accordance with the quick user guide accompanying this device.

Information on Use Restrictions for Residential, Commercial, and Industrial Areas

The device is intended for use in residential, commercial, and industrial areas without exposure to hazardous and harmful production factors. The device is designed for continuous round-the-clock operation without the constant presence of service personnel.

Information on Measures for Equipment Malfunction

In case of equipment malfunction: 1) turn off the equipment 2) disconnect the equipment from the power supply 3) contact a service center or an authorized dealer for consultation or repair of the equipment. The device's manufacturing date is indicated on the box in the format YY/MM (YY-year, MM-month). Country of manufacture – China.