Product Overview
The SilverStone PT15 is a premium aluminum case designed for Intel Haswell-based NUC motherboards.
- Compatible with most Intel Haswell-based NUC motherboards.
- Features premium aluminum construction and SilverStone styling.
- Includes pre-assembled WIFI antenna and Bluetooth for ease of deployment.
- Super small design measuring 130mm x 110mm x 41mm.
- Includes VESA MISD-75 mounting bracket.
- Supports DIN rail mounting.
VESA Mount Installation Procedure (for Monitor)
-
Step 2: Secure VESA Mount Bracket
Secure the VESA mount bracket to the rear of the monitor using four screws.
Description of Diagram: The diagram shows a monitor's rear panel with four VESA mounting holes. A VESA mount bracket is depicted being attached to these holes with four screws.
-
Step 3: Mount PT15 Case to Bracket
Align the SilverStone PT15 case with the VESA bracket and push it downwards to complete the installation.
Description of Diagram: The diagram illustrates the VESA bracket attached to the monitor. The PT15 case is shown being aligned with the bracket and then pushed downwards to lock into place.
Motherboard Installation Procedure
-
Step 1: Loosen Front and Rear Screws
Loosen two screws from the front and rear of the PT15 case.
-
Step 2: Remove Bottom Tray
Loosen four screws and foot stands from the bottom of the PT15 case, then pull out the bottom tray.
Description of Diagram: The diagram shows the bottom of the PT15 case. Four screws and foot stands are indicated for loosening and removal, allowing the bottom tray to be extracted.
-
Step 3: Connect WiFi Antenna Cable
If the motherboard supports WiFi, connect the WiFi antenna cable to the WiFi module at this point.
Description of Diagram: The diagram shows a close-up of a motherboard, highlighting the WiFi module and the connection of an antenna cable.
-
Step 4: Install Motherboard
Install the motherboard onto the bottom tray and secure it with four screws.
Description of Diagram: The diagram shows the bottom tray with the motherboard positioned on it, and four screws indicated for securing the motherboard to the tray.
-
Step 5: Reinsert Bottom Tray
Insert the installed bottom tray back into the PT15 case.
Description of Diagram: The diagram illustrates the assembled bottom tray (with motherboard) being slid back into the main PT15 case.
-
Step 6: Secure Rear Case Screws
Secure two screws back to the rear of the PT15 case.
Description of Diagram: The diagram shows the rear of the PT15 case with two screws being used to secure it.
-
Step 7: Reattach Bottom Foot Stands and Screws
Secure four screws and foot stands back to the bottom of the PT15 case.
Description of Diagram: The diagram shows the bottom of the PT15 case with four screws and foot stands being reattached.
VESA Mount Installation Procedure (Bottom of PT15)
-
Step 1: Secure Anti-Vibration Gasket
Secure the anti-vibration rubber gasket to the bottom of the PT15 case using two screws.
Description of Diagram: The diagram shows the bottom of the PT15 case. A rubber gasket is placed on the bottom, and two screws are depicted securing it.
Warranty Information
This product has a limited 3-year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Warranty Terms & Conditions
- Product component defects or damages resulting from defective production are covered under warranty. Defects or damages under the following conditions will be fixed or replaced at SilverStone Technology's discretion:
- Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
- Damage not caused by natural disasters (e.g., thunder, fire, earthquake, flood, salt, wind, insect, animals, etc.).
- Product is not disassembled, modified, or repaired. Components must not be disassembled or replaced.
- Warranty marks/stickers are not removed or broken.
- Under warranty, SilverStone Technology's maximum liability is limited to the current market value of the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or losses associated with the use of the product.
- Under warranty, SilverStone Technology is obligated to repair or replace its defective products. SilverStone Technology will not be liable for damages in connection with the sale, purchase, or use of the product, including but not limited to loss of data, loss of business, loss of profits, loss of use of the product, or incidental or consequential damages, whether foreseeable or not, and whether based on breach of warranty, contract, or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
- Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second-hand purchaser.
- You must provide a sales receipt or invoice with a clear indication of the purchase date to determine warranty eligibility.
- If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone at http://www.silverstonetek.com. Please note that:
- You must provide proof of original purchase of the product by a dated itemized receipt.
- You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service.
- Before sending the product, you must be issued a Return Merchandise Authorization ("RMA") number from SilverStone.
Additional Information & Contacts
For North America: usasupport@silverstonetek.com
SilverStone Technology in North America may repair or replace defective products with refurbished products that are not new but have been functionally tested. Replacement products will be warranted for the remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase. After 30 days, customers need to initiate the RMA procedure with SilverStone Technology in the USA by first downloading the "USA RMA form for end-users" from the following link and following its instructions: http://silverstonetek.com/contactus.php
For Australia: support@silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to the above "Warranty Terms & Conditions" for further warranty details.
Company Address: SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C.
Phone: +886-2-8228-1238 (standard international call charges apply)
For Europe: support.eu@silverstonetek.de
For all other regions: support@silverstonetek.com
All trademarks are registered to their respective owners. ©2014 SilverStonetek Co., Ltd. All Rights Reserved. NO.G11221090
