Special Features
- Special wavy foam padding for noise absorption.
- Super clean internal look with PSU and drive bay cover.
- Includes front-mounted USB 3.0 Type-C port.
- Smart backside cable routing design.
- Motherboard back plate opening for quick CPU cooler assembly.
- Includes two 140mm fans designed to generate positive pressure.
- Supports graphics cards up to 15.3 inches.
Installation and Component Limitations
Front Panel Fan Slot Limitation
Diagram shows a side view of the front panel, indicating a 20mm space. Text explains that a decorative plate from the PSU/drive cover must be removed for 140mm fan installation on the bottom-most fan slot.
To install a 140mm fan in the bottom-most fan slot, the decorative plate on the PSU/drive cover must be removed.
CPU Cooler Limitation
Diagram illustrates the motherboard and CPU cooler space, showing a 163mm height limit for the CPU cooler with 29mm clearance over the motherboard's top edge.
The maximum height for a CPU cooler is 163mm, with an additional 29mm clearance over the motherboard's top edge.
Power Supply Limitation
Diagram shows the interior of the case with the power supply area, indicating a depth limit for the PSU.
The KL07 supports power supplies with a depth of 140mm to 200mm.
Graphics Card / Expansion Card Length Limitation
Diagram displays the interior of the case with a graphics card installed, showing the maximum supported length.
The KL07 supports graphics cards up to 15.3 inches (390mm) in length, accommodating most retail consumer cards.
Radiator Limitation
Diagram shows the top of the case, indicating space for radiator installation.
The case is designed to accommodate radiators, with specific mounting points available at the top.
Specifications
| Model No. | SST-KL07B (black) |
|---|---|
| Material | Plastic front panel, steel body |
| Motherboard | ATX (up to 12" x 11"), Micro ATX |
| Drive Bay | Exposed: None Internal: 3.5" x 3 (compatible with 2.5"), 2.5" x 3 |
| Cooling System | Front: 3 x 120/140mm fan slot (2 x 140mm intake fans included) Rear: 1 x 120/140mm fan slot (1 x 140mm exhaust fan included) Top: 2 x 120/140mm fan slot |
| Expansion Slot | 7 |
| Front I/O Port | USB 3.0 x 2, Type-C* x 1, Audio x 1, MIC x 1 |
| Power Supply | Optional PS2 (ATX) |
| Expansion Card Limitation | Compatible up to 15.3" in length, width restriction ≤ 6.5" |
| Limitation of CPU cooler | 163 ~ 172mm** |
| Limitation of PSU | 140 ~ 200mm*** |
| Dimension | 222mm (W) x 510mm (H) x 467mm (D), 52.8 Liters |
* SuperSpeed USB (USB 3.1) requires total cable length to be 1 meter (1000mm) or shorter. Recommend using external USB Type-C cable with length of 400mm or less due to KL07's internal USB Type-C cable already taking up 600mm of the total length requirement.
** 163mm is from CPU's top surface to wavy foam pad's surface.
*** Depend on drive cage's position
Warranty Information
This product has a limited 1-year warranty in North America and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Warranty Terms & Conditions
- Product component defects or damages resulted from defective production are covered under warranty. Defects or damages under the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction:
- Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
- Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc.).
- Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
- Warranty mark/stickers are not removed or broken.
- Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
- Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
- Under warranty, SilverStone Technology is obligated to repair or replace its defective products. SilverStone Technology will not be liable for damages in connection with the sale, purchase, or use, including but not limited to loss of data, business, profits, or use of the product, or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract, or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
- Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable.
- Proof of purchase (sales receipt or invoice with clear indication of purchase date) is required to determine warranty eligibility.
- If a problem develops during the warranty period, contact your retailer/reseller/SilverStone authorized distributors or SilverStone at http://www.silverstonetek.com.
- Customers must provide proof of original purchase, obtain a Return Merchandise Authorization ("RMA") number from SilverStone before sending the product, and bear the cost of shipping the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping the product back after service.
- Updated warranty information is available on SilverStone's official website: http://www.silverstonetek.com.
Additional Information & Contacts
For North America: usasupport@silverstonetek.com. SilverStone Technology in North America may repair or replace defective products with refurbished, functionally tested units. Replacement products are warranted for the remainder of the warranty period or thirty days, whichever is longer. Products should be returned to the place of purchase within 30 days; after 30 days, customers must initiate an RMA procedure with SilverStone Technology in the USA by downloading the "USA RMA form for end-users" from http://silverstonetek.com/contactus.php.
For Australia: support@silverstonetek.com. Products come with guarantees that cannot be excluded under the Australian Consumer Law. Customers are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage. Goods can be repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
For Europe: support.eu@silverstonetek.de.
For all other regions: support@silverstonetek.com.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply).
