Bosch D9412GV3 Control Panel
Brand: Bosch
Product Overview
The Bosch D9412GV3 Control Panel is a powerful solution designed for intrusion, access control, and fire alarm system applications. It offers integrated functionality, allowing users to manage these three critical security aspects through a single system, thereby reducing complexity and enhancing efficiency.
The control panel features a communicator that sends events to selected public switched telephone network (PSTN), IP network, or general packet radio service (GPRS) destinations via four programmable route groups. It supports up to 246 individually identified points, each capable of accommodating normally-open (NO) and normally-closed (NC) devices with end-of-line (EOL) resistor supervision. Points are programmable for fire, fire supervisory, or intrusion applications.
Image Description: The image displays the Bosch D9412GV3 Control Panel unit, a compact black device with indicator lights and ports. It is shown alongside several compatible keypads, including a vacuum fluorescent display model, a touch-screen model, and a standard numeric keypad, illustrating the user interface options.
Key Features
- Fully integrated intrusion, fire, and access control, allowing users to interface with one system instead of three.
- Conettix IP-based communication options provide high-speed, secure alarm transport and control through connection of up to two wired (DX4020) and/or wireless (ITS-DX4020-G) network interfaces.
- Supports up to 32 programmable areas with perimeter and interior partitioning.
- Offers 246 points with flexible configuration options to meet multiple installation requirements.
- Commercial Wireless capability supports up to 238 RF points.
- Accommodates up to 16 supervised keypads, available in vacuum fluorescent, ATM style, or touch-screen configurations.
Functions
Programmable Outputs
- 2 A alarm power at 12 VDC
- 1.4 A auxiliary power at 12 VDC
System Response
- High-performance micro-controller provides industry-leading system response.
- 31 custom point indexes, including fire supervisory.
- Selectable point response time.
- Cross point capability.
- Fire alarm verification.
- Fire inspector's local test.
- Watch mode.
- Scheduled events (skeds) for arming, disarming, bypassing points, controlling relays, authority levels, and door access.
User Interface
- Supervision of up to 16 keypads (up to 32 unsupervised keypads can be used).
- Custom keypad text is fully programmable, including for remote programming.
- Full function command menu including custom functions.
- Authority by area and 16-character name for each user.
- 14 custom authority levels control user's authority to change, add, or delete passcodes or access control credentials; to disarm or bypass points; and to start system tests.
Advanced Features
Area Configurations
Area programming offers a wide selection of different system configurations. Each area is assigned an account number to define annunciation, control, and reporting functions. Multiple areas can be linked to a shared area which is automatically controlled (hallway or lobby). Area arming can be conditional on other areas (master or associate). Any area can be configured for perimeter and interior arming, not requiring a separate area for this function.
Two Man Rule
The Two Man Rule provides added security by requiring two people to be present at opening or two unique passcodes on the same keypad to disarm an area. Without the second passcode, the system denies entry.
Early Ambush
Early Ambush requires two passcode entries on the same keypad. The first entry disarms the area, and the second entry stops a timer programmed to send a duress event. If the second entry does not occur within the programmed time, a duress event is generated. This feature allows users to inspect the premises and use the system to confirm the area is safe.
Easy Exit Control
The D9412GV3 Control Panel allows changing from one armed state to another without disarming. For example, changing from Master Arm to Perimeter Arm is reported by the panel. This simplifies system operation by reducing keystrokes.
Programmable Passcode-controlled Menu List
Users must enter a passcode before viewing the keypad menu. The display shows only menu options allowed according to the user's authority level, simplifying operation by presenting pertinent information only.
Passcode Follows Scope
This feature restricts passcode arming and disarming to the keypad's immediate local area, even if the keypad can report events from other areas. It simplifies the arming/disarming procedure without limiting other keypad capabilities.
Invisible Walk Test
A menu item allows testing of invisible 24-hour points within the keypad's scope without sending a report to the central station.
Door-Activated Custom Function
A custom function activates when user credentials are presented to a D9210B door controller's reader, behaving as if the user performed a function at the associated keypad.
Passcodes
User passcodes are three to six digits. Each user can be assigned one of 14 customized authority levels in each area, and passcodes can be restricted to operate only during certain times. The Two Man Rule and Early Ambush options require two passcodes for enhanced security.
Communications
The D9412GV3 Control Panel prioritizes and sends reports in Contact ID or Modem IIIa2 formats to four route groups, each with a programmable primary and backup destination. It offers flexible communications for central stations with capabilities such as individual point numbers, opening/closing reports, remote programming attempts, and diagnostic reports. The panel uses DX4020 Ethernet Network Interface Modules and/or ITS-DX4020-G GPRS/GSM Communicators with Conettix D6600 and D6100i Receiver/Gateways, providing a secure path with anti-replay/anti-substitution features and encryption. Both modules support remote programming.
Security and Fire Detection
The D9412GV3 provides eight on-board points and up to 238 additional off-board points. Individual points can be programmed to monitor burglar alarms, fire alarms, and supervision devices.
Commercial Wireless
The Commercial Wireless platform, powered by Inovonics wireless mesh network technology, ensures superior range, reliability, and scalability for commercial applications. It uses a wide range of transmitters and repeaters, offering flexibility and performance. This protocol is exclusive to Commercial Wireless products.
Event Log and Access Control
Event Log
The event log stores up to 1,000 local and transmitted events, including time, date, event, area, point, and user number. The log can be viewed from a keypad or retrieved remotely via RPS. RPS operators can retrieve events periodically, reducing the need for multiple daily calls. An optional report can be sent when the log reaches a programmed threshold.
Access Control
The D9412GV3 provides custom door strike, point shunt, and auto disarming response by area. It features 14 panel-wide access levels with manual and scheduled control. Access events such as 'Access granted', 'No entry', 'Request-to-enter', and 'Request-to-exit' can be stored, viewed, or printed.
Scheduled Events (Skeds) and Fire Test
Scheduled Events (Skeds)
The internal clock and calendar initiate scheduled events (skeds) for functions like arming, disarming, relay control, or point bypassing. The D9412GV3 Control Panel offers:
- 40 scheduled events with up to 25 different functions.
- Eight opening windows and eight closing windows.
- Eight user windows.
- Day-of-week, date-of-month, or holiday-only schedules.
- Four holiday schedules of 366 days each (leap year).
Fire Test
Activating Fire Test Mode suppresses all reports to the central station. The keypad and annunciator display testing data. An automatic sensor reset feature saves time. At the end of the test, the keypad shows the number of untested points.
Programming, Diagnostics, and Controls
Installers can perform limited on-site programming via keypad for critical parameters (e.g., Account IDs, Central Station and RPS IP addresses, phone numbers, reporting formats). Full programming can be done on-site or remotely (attended or unattended) with RPS. A programmable system passcode prevents unauthorized remote programming.
D9412GV3 Control Panels accommodate up to four separate destinations for primary, alternate, and backup receivers for automatic test reports. When resetting alarms or arming/disarming, the user is identified by name and number.
ROM Updates
An on-site flash update key allows for easy feature enhancements without replacing ROM chips.
Certifications and Approvals
| Region | Certification | Details | |
|---|---|---|---|
| USA | UL | AMCX: Central Station Alarm Units (ANSI/UL 1610 and 1635); AMTB: Control Panels, SIA False Alarm Reduction (UL 864 and ANSI/SIA CP-01-2000); AOTX: Local Alarm Units (ANSI/UL 609 and ANSI/UL 464); APAW: Police Station Alarm Units (ANSI/UL 365 and ANSI/UL 464); APOU: Proprietary Alarm Units (ANSI/UL 1076); NBSX: Household Burglar Alarm System Units (ANSI/UL 1023); UOJZ: Control Units, System (ANSI/UL 864); UTOU: Control Units and Accessories, Household System Type (ANSI/UL 985) | |
| FM | CSFM | 7165-1615:0238 FIRE ALARM CONTROL UNIT (COMMERCIAL) | |
| 7167-1615:0239 CONTROL UNIT (HOUSEHOLD) | |||
| FDNY-CoA | 6059 | ||
| FCC | Designed to comply with Part 15 |
Installation/Configuration Notes
Compatible Products
Keypads
- D1260 Series Keypads (D1260, D1260W, D1260R, D1260BLK, D1260B)
- D720 Series Keypads (D720, D720W, D720R, D720B)
- D1255 Series Keypads (D1255, D1255W, D1255B, D1255RB)
- D1256RB Fire Keypad
- D1257RB Remote Fire Alarm Annunciator
- D1265 Touch Screen Keypad
- D279A Independent Zone Control
Detectors
- D278S Four-wire Addressable Detector Base, 12 VDC
- D285/TH Photoelectric Smoke Detector Heads
- D298S Addressable Detector Base, 24 VDC
- D7050 Series Addressable Photoelectric Smoke and Smoke Heat Detector Heads
- F220-B6PM/S Addressable Detector Bases with POPITs
- MX775i Addressable PIR Detector
- MX794i Long Range Multiplex PIR Detector
- MX934i Addressable PIR Detector
- MX938i Addressable PIR Detector
- ZX776Z PIR Detector
- ZX794Z Long Range PIR Detector
- ZX835 TriTech Microwave/PIR Detector
- ZX935Z PIR Detector
- ZX938Z PIR Detector
- ZX970 PIR/Microwave Detector
- Bosch conventional detectors, including Blue Line, seismic, PIR, TriTech PIR Microwave, photoelectric, heat, and smoke.
Enclosures
- D8103 Universal Enclosure
- D8108A Attack-resistant Enclosure
- D8109 Fire Enclosure
Magnetic Contacts
Bosch magnetic contacts include recessed, terminal connection, miniature, overhead door, and surface mount types.
Modules
- Conettix ITS-DX4020-G GPRS/GSM Integrated Communicator
- Conettix DX4020 Network Interface Module
- Conettix DX4010V2 USB/Serial Interface Module
- Conettix C900V2 Dialer Capture Module
- D113 Battery Lead Supervision Module
- D125B Dual Class B Initiating Module
- D127 Reversing Relay Module
- D129 Class A Initiating Module
- D130 Auxiliary Relay Module
- D185 Reverse Polarity Signaling Module
- D192G Notification Appliance Circuit Module
- D928 Phone Line Switcher
- D5060 MUX Programmer
- D8125 POPEX Point Expander
- D8128D OctoPOPIT Eight-point Expander
- D8125MUX Point Expander
- D8125INV Wireless Interface Module
- D8129 Octo-relay Module
- D8130 Door Release Module
- D9127 Series POPIT Modules
- D9131A Parallel Printer Interface Module
- D9210BLC Access Control Interface Module
- DS7432 Eight-input Remote Module
- DS7457i Series Single-zone Multiplex Input Modules
- DS7460i Two-input Module
- DS7461i Single-input Multiplex Module
- DS7465i Input and Output Module
- ICP-SDI-9114 SDI Splitter
Programming
- RPS or RPS-LITE Remote Programming Software
Readers
- ARD-R10 iCLASS Mullion Reader
- ARD-R40 iCLASS Switchplate Reader
- ARD-RK40-09 iCLASS PIN Reader
- ARD-VSMART iCLASS Reader
- D8223 Prox Pro Reader
- D8224 Mullion Reader
- D8224-SP Switch Plate Reader
- D8225 Mini Mullion Reader
- D8301W Low-profile Proximity Readers
Commercial Wireless Products
- ISW-D8125CW Commercial Wireless Interface
- ISW-EN7280 Serial Receiver
- ISW-EN4200 Serial Receiver
- ISW-EN4204R LED Receiver
- ISW-EN4216R LCD Receiver
- ISW-EN4016SK Survey Receiver
- ISW-EN5040-T High-power Repeater
- ISW-EN1210 Universal Transmitter (Single-input)
- ISW-EN1210EOL Universal Transmitter with EOL Resistor
- ISW-EN1210SK Survey Transmitter
- ISW-EN1210W Door-Window Transmitter with Reed Switch
- ISW-EN1215EOL Universal Transmitter with Wall Tamper and EOL Resistor
- ISW-EN1215WEOL Door-Window Transmitter with Wall Tamper, Reed Switch, and EOL Resistor
- ISW-EN1223D Water-resistant Pendant Transmitter (Double-button)
- ISW-EN1223S Water-resistant Pendant Transmitter (Single-button)
- ISW-EN1223SK Survey Pendant Transmitter
- ISW-EN1233D Necklace Pendant Transmitter (Double-button)
- ISW-EN1233S Necklace Pendant Transmitter (Single-button)
- ISW-EN1235D Beltclip Pendant Transmitter (Double-button)
- ISW-EN1235S Beltclip Pendant Transmitter (Single-button)
- ISW-EN1235DF Fixed-location Transmitter (Double-button)
- ISW-EN1235SF Fixed-location Transmitter (Double-button)
- ISW-EN1242 Smoke Detector-Transmitter
- ISW-EN1247 Glassbreak Sensor-Transmitter
- ISW-EN1249 Billtrap Transmitter
- ISW-EN1260 PIR Motion Sensor Transmitter (Commercial and High-end Domestic Applications)
- ISW-EN1261HT PIR Motion Sensor Transmitter (High-traffic Areas)
- ISW-EN1262 PIR Motion Sensor Transmitter (Residential and Low-traffic Commercial Applications)
- ISW-EN1265 PIR Motion Sensor Transmitter (Ceiling-mount Applications)
Technical Specifications
Environmental Considerations
- Relative Humidity: 5% to 93% at +30°C (+86°F), non-condensing
- Temperature (Operating): 0°C to +50°C (+32°F to +122°F)
Number of...
| Areas: | 8 |
| Card Readers (Doors): | 8 |
| Credentials (Tokens): | 996 |
| Custom Functions: | 16 |
| Events: | Up to 1000 |
| Passcode Users: | 249, plus 1 service passcode |
| Parallel Printers: | 3 |
| Points: | 246 (8 on-board, up to 238 off-board) |
| Programmable Relay Outputs: | 131 |
| RF Points: | 238 |
| SKEDS: | 64 |
Power Requirements
- Current Draw (Maximum): 300 mA
- Output (Alarm): 2 A at 12 VDC
- Output (Auxiliary, Continuous Power, and Switched Auxiliary combined): 1.4 A at 12 VDC nominal
- Voltage (Operating): 12 VDC nominal
- Voltage (AC): 16.5 VAC 40 VA plug-in transformer (D1640)
Communications
- SDI Bus A (+): 9 VDC, 4572 m (15,000 ft)
- SDI Bus B (-): 9 VDC, 4572 m (15,000 ft)
- Telephone Connection: One telephone line; D928 Dual Phone Line Module required for two telephone lines.
Parts Included
| Quant. | Component |
|---|---|
| 1 | D9412GV3 Board |
| 1 | Mounting Skirt |
| 1 | Faceplate with D9412GV3 Label |
| 1 | Literature pack
|
| 1 | Literature CD containing all product literature |
Available Kits
| Components | -A | -B | -C |
|---|---|---|---|
| D9412GV3 Board | 1 | 1 | 1 |
| D101F Lock and Key Set | 1 | ||
| D122 Dual Battery Harness | 1 | ||
| D161 Dual Modular Phone Cord | 2 | ||
| D928 Dual Phone Line Switcher | 1 | ||
| D1640 Transformer | 1 | 1 | |
| D8103 Enclosure | 1 | ||
| D8108A Attack-resistant Enclosure | 1 | ||
| D8109 Fire Enclosure | 1 |
Ordering Information
Control Panel
| Product | Model | Description |
|---|---|---|
| D9412GV3 Control Panel | D9412GV3 | Includes one printed circuit board (PCB) with mounting skirt and faceplate with label, and a literature pack and CD. |
| D9412GV3-A Attack-resistant Package | D9412GV3-A | Contains one PCB, one transformer, and one attack-resistant enclosure. |
| D9412GV3-B Fire/Burglar Package | D9412GV3-B | Contains one PCB, one dual battery harness, two telephone cords, one telephone line switcher, one transformer, and one fire enclosure. |
| D9412GV3-C Standard Burglar Package | D9412GV3-C | Contains one PCB, one lock and key set, one transformer, and one universal enclosure. |
Accessories
| Product | Model | Description |
|---|---|---|
| SDI Splitter | ICP-SDI-9114 | Provides the ability to set up two independent SDI buses from a single SDI connection on the control panel. |
| Tamper Switch | D110 | Screw-on tamper switch that fits all enclosures. Shipped in packages of two. |
| Dual Tamper Switch | ICP-EZTS | Combination tamper switch with a wire loop for additional tamper outputs. |
| Universal Enclosure | D8103 | Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). |
| Attack Resistant Enclosure | D8108A | Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). UL Listed. Includes lock and key set. Requires the D2402 Mounting Plate. |
| Fire Enclosure | D8109 | Red steel enclosure measuring 40.6 cm x 40.6 cm x 8.9 cm (16 in. x 16 in. x 3.5 in). UL Listed. Includes a lock and key set. |
| Dual Phone Line Switcher | D928 | Allows the control panel to operate over and supervise two separate phone lines. Only one D162 phone cord is supplied. Two additional D161 or D162 phone cords are required. |
| Dual Battery Harness | D122 | Harness with circuit breaker. Connects two batteries to a compatible control panel. |
| Dual Battery Harness with Long Leads | D122L | Color-coded harness with circuit breaker and leads measuring 89 cm (35 in.). Connects 12 V batteries to compatible control panels. |
Batteries
| Product | Model | Description |
|---|---|---|
| Standby Battery (12 V, 7 Ah) | D126 | Sealed lead-acid standby and auxiliary rechargeable power supply. |
| Battery (12 V, 18 Ah) | D1218 | A 12 V sealed lead-acid battery for standby and auxiliary power with two bolt-fastened terminals. Includes hardware for attaching battery leads or spade connectors. |
| Battery (12 V, 26-28 Ah) | D1224 | A 12 V sealed lead-acid battery for standby and auxiliary power with two bolt-fastened terminals. Includes hardware for attaching battery leads or spade connectors. |
Mounting Brackets
| Product | Model | Description |
|---|---|---|
| Mounting Bracket | D137 | Used to mount accessory modules in D8103, D8108A, and D8109 enclosures. |
| Mounting Bracket, Right Angle | D138 | Used to mount accessory modules in D8103, D8108A, and D8109 enclosures. |
Transformer
| Product | Model | Description |
|---|---|---|
| Transformer | D1640 | System transformer rated at 16.5 VAC, 40 VA. |
| Transformer Enclosure | D8004 | For applications such as fire alarm that might require a transformer enclosure. |
Mounting Skirt
| Product | Model | Description |
|---|---|---|
| Mounting Skirt | D9002-5 | Mounts inside D8103, D8108A, and D8109 enclosures. Can accept up to six standard 7.62 cm x 12.7 cm (3 in. x 5 in.) cards. |
Lock and Key Set
| Product | Model | Description |
|---|---|---|
| Lock and Key Set | D101 | Standard lock set with one key supplied. Uses the D102 (#1358) replacement key. |
Software Options
| Product | Model | Description |
|---|---|---|
| RPS Kit (USB) | D5500C-USB | Account management and control panel-programming software with USB connection. |
Trademarks
Trademark names are used throughout this document. In most cases, these designations are claimed as trademarks or registered trademarks in one or more countries by their respective owners. Rather than placing a trademark symbol in every occurrence of a trademark name, Bosch Security Systems, Inc. uses the names only in an editorial fashion and to the benefit of the trademark owner with no intention of infringing the trademark.
Inovonics is a trademark of Inovonics Wireless Corporation.
