D9412GV2 Control Panel

The D9412GV2 Control Panel is a fully integrated solution designed for access control, intrusion detection, and fire alarm system applications. It allows users to interface with a single system instead of managing three separate ones, providing comprehensive security monitoring and control.

Key Features

Fully integrated intrusion, fire, and access control.
NetCom IP-based communication option for high-speed, secure alarm transport and control.
Eight programmable areas with perimeter and interior partitioning.
246 points with flexible configuration options.
Choice of vacuum fluorescent or ATM-style user interface command centers.
New user interface functions for enhanced security and flexibility.
Up to 238 RF points.

System Overview

The D9412GV2 Control Panel integrates access control, intrusion, and fire alarm functionalities. It monitors alarm points for intruder or fire events while managing user command centers and other outputs. The panel includes a communicator that sends events to Public Switched Telephone Network (PSTN) or IP network destinations via four programmable route groups. System functions can be programmed on-site using a D5200 Programmer or remotely via Remote Programming Software (RPS). It supports up to eight doors of access control with the optional D9210BLC Access Control Interface Module and offers up to 246 individually identified points, each supporting normally-open (NO) and normally-closed (NC) devices with end-of-line (EOL) resistor supervision. Points can be programmed for fire, fire supervisory, or intrusion applications.

Functions

Programmable Outputs

2 A alarm power at 12 VDC
1.4 A auxiliary power at 12 VDC
Four alarm output patterns
Programmable bell test
Programmable bell shut-off timer

System Response

31 custom point indexes, including fire supervisory.
Selectable point response time.
Cross point capability.
Fire alarm verification.
Fire inspector's local test.
Watch mode.
Scheduled events (skeds) for arming, disarming, bypassing points, controlling relays, authority levels, and door access.

User Interface

The system supervises up to eight command centers (or up to 32 unsupervised command centers). It features custom command center text and a full function command menu with custom options. Each user is assigned authority by area and a 16-character name. Fourteen custom authority levels control user permissions for changing passcodes or access control credentials, disarming, bypassing points, and starting system tests. The brightness and volume for the command center display or sounder are adjustable. A command center is required in each system.

Area Configurations

Area programming offers a wide selection of system configurations. Each area can be assigned an account number to define annunciation, control, and reporting functions. Multiple areas can be linked to an automatically controlled shared area, such as a hallway or lobby. Area arming can be conditional on other areas (master and associate).

Advanced Security Features

Two Man Rule

Requires two unique passcodes entered at the same command center to disarm an area. Without the second passcode, entry is denied. This feature ensures the presence of two people at opening for added security, particularly in financial institutions.

Early Ambush

Requires two passcode entries on the same command center. The first entry disarms the area, and the second entry stops a timer programmed to send a duress event. If the second entry is not made within the programmed time, a duress event is generated. This allows users to inspect premises safely before full system disarming.

Easy Exit Control

Allows the D9412GV2 Control Panel to change from one armed state to another without disarming, simplifying operation and reducing keystrokes. For example, changing from Master Arm to Perimeter Arm is handled seamlessly.

Passcode-controlled Menu List

Users must enter a passcode before viewing the command center menu. The display shows only menu options permitted by the user's authority level, simplifying operation by presenting relevant information and functions.

Passcode Follows Scope

Restricts passcode arming and disarming to the command center's immediate local area, even if the command center can report events from other areas. This simplifies arming/disarming without limiting other command center capabilities.

Invisible Walk Test

A menu item enables testing of invisible 24-hour points within the command center's scope without sending reports to the central station.

Door Activated Custom Function

A custom function is activated when user credentials are presented to a D9210B door controller's reader. This function mimics a manual operation performed at the command center associated with that door controller.

Passcodes

User passcodes consist of three to six digits. Each user can be assigned one of fourteen customized authority levels per area. Passcodes can be restricted to operate only during specific times. The Two Man Rule and Early Ambush options require two passcodes, enhancing security in sensitive environments like banks.

Communications

The D9412GV2 Control Panel prioritizes and sends reports to four route groups, each with a programmable primary and backup destination. It integrates with the D6600 NetCom Communications System via a DX4020 Network Interface Module, offering programmable anti-replay and anti-substitution features. The Modem IIIa2 Communications Format, compatible with Bosch receivers, provides advanced reporting capabilities, including individual point numbers and text, opening/closing reports by area, remote programming attempts, diagnostic reports, and user name transmission to the central station.

Security and Fire Detection

The control panel includes eight on-board points and supports up to 238 additional off-board points (depending on model and expansion interfaces). Individual points can be programmed to monitor various alarm types, including burglar alarms, fire alarms, and supervision devices.

Event Log

The event log stores up to 1,000 local and transmitted events, including time, date, event type, area, point, and user number. The log can be viewed from select command centers or retrieved remotely using RPS. RPS operators can collect events periodically with a single call. An optional report can be sent to a receiver when the event log reaches a programmed threshold.

Access Control

The D9412GV2 provides custom door strike, point shunt, and auto disarming responses by area. It features 14 panel-wide access levels with manual and scheduled control. Access events such as 'Access granted', 'No entry', 'Request-to-enter', and 'Request-to-exit' can be stored, viewed, or printed.

Scheduled Events (Skeds)

The internal clock and calendar enable scheduled events (skeds) to perform functions like arming/disarming, relay control, or point bypassing. The D9412GV2 Control Panel supports up to 40 scheduled events with 25 different functions, eight opening windows, eight closing windows, eight user windows, and day-of-week, date-of-month, or holiday-only schedules. It includes four holiday schedules covering 366 days each.

Fire Test

Activating Fire Test Mode suppresses all reports to the central station, while the command center and annunciator display all testing data. An automatic sensor reset feature simplifies testing by eliminating manual resets. At the end of the test, the command center indicates the number of untested points.

Programming, Diagnostics and Controls

Users can program the system on-site using a D5200 Programmer or remotely via RPS. A programmable system passcode prevents unauthorized remote programming. The D9412GV2 Control Panels accommodate up to four separate telephone numbers for primary, alternate, and backup receivers for automatic test reports. System resets, arming, and disarming actions identify the user by name and number.

Parts Included

Component	Quantity
D9412GV2 Board	1
Mounting Skirt	1
Faceplate with D9412GV2 Label	1

Certifications and Approvals

The D9414GV2 Control Panel is designed to comply with the following certifications, standards, and approvals:

UL Standards Approvals

UL365, Police Station Burglar Alarm Units and Systems
UL464, Audible Signal Appliances
UL609, Local Burglar Alarm Units and Systems
UL864, Control Units for Fire-protective Signaling Systems
UL985, Household Fire Warning System Units
UL1023, Household Burglar-alarm System Units
UL1076, Proprietary Burglar Alarm Units and Systems
UL1610, Central-station Burglar-alarm Units
UL1635, Digital Alarm Communicator System Units

FCC: AJ9MLU-46532-AL-E

Installation/Configuration Notes

Compatible Products

Command Centers

D1260 Series Command Centers (D1260, D1260W, D1260R, D1260BLK, D1260B)
D720 Series Command Centers (D720, D720W, D720R, D720B)
D1255 Series Command Centers (D1255, D1255W, D1255R, D1255B)
D1256 Fire Command Center
D1257 Remote Fire Alarm Annunciator
D279A Independent Zone Control

Communications Formats

Modem IIIa2
BFSK

Programming

D5200 Series Programmers
Remote Programming Software (RPS)
D5060 MUX Programmer

Modules

C900TTL-E Dialer Capture Module
D125B Dual Class B Initiating Module
D127 Reversing Relay Module
D129 Class A Initiating Module
D130 Auxiliary Relay Module
D185 Reverse Polarity Signaling Module
D192C Notification Appliance Circuit Module
D192G Notification Appliance Circuit Module
D8125 POPEX Point Expander
D8128D OctoPOPIT Eight Point Expander
D8125MUX Point Expander
D8129 Octo-relay Module
D9127 Series POPIT Modules
D9131A Parallel Printer Interface Module
D9210BLC Access Control Interface Module
DX4010i RS-232 Serial Interface Module
DX4020 Network Interface Module
rvm4c Remote Video Module

Peripheral Hardware

Detectors

D278S Four-wire Addressable Detector Base
D285/TH Photoelectric Smoke Detector Heads
D298S Addressable Detector Base
D462 Addressable Manual Station
MX250 Series Smoke Detectors
MX775i Addressable PIR Detector
MX794i Long Range Multiplex PIR Detector
MX934i Addressable PIR Detector
MX938i Addressable PIR Detector
ZX776Z PIR Detector
ZX794Z Long Range PIR Detector
ZX835 TriTech Microwave/PIR Detector
ZX935Z PIR Detector
ZX938Z PIR Detector
ZX970 PIR/Microwave Detector
Bosch conventional detectors include Blue Line, seismic, PIR, TriTech PIR Microwave, photoelectric, heat, and smoke.

Magnetic Contacts

Bosch magnetic contacts include recessed, terminal connection, miniature, overhead door, and surface mount.

Wireless Products

D8125INV Wireless Interface
FA113 Keychain Remote Control
FA116 Executive Programmer
FA202 Wireless Smoke Detector and Transmitter
FA203S Necklace Pendant Transmitter (Single-button)
FA203D Necklace Pendant Transmitter (Double-button)
FA204 Necklace Pendant Transmitter
FA205S Belt Clip/Loop Transmitter (Single-button)
FA205D Belt Clip/Loop Transmitter (Double-button)
FA206DS PIR Transmitter
FA206i PIR Transmitter
FA207 Glass Break Detector
FA209 Billtrap Transmitter
FA210 Universal Transmitter (Off-White)
FA210W Universal Wide Gap Transmitter (Off-white) with Internal Reed Switch
FA216L Low Temperature Transmitter
FA216H High Temperature Transmitter
FA223S Water-resistant Pendant (White Single-button)
FA223D Water-resistant Pendant (Black Double-button)
FA250 High-power Universal Transmitter
FA400 Remote Receiver
FA404R Transmitter Receiver
FA416R Transmitter Receiver
FA570 High Power Indoor Repeater
FA575 High Power Indoor/Outdoor Repeater

Readers

ARD-R10 iCLASS Mullion Reader
ARD-R40 iCLASS Switchplate Reader
ARD-RK40-09 iCLASS PIN Reader
ARD-VSMART iCLASS Reader
D8201/W Series Low-profile Readers
D8203/W Series Mullion Proximity Readers
D8223 Prox Pro Reader
D8224 Mullion Reader
D8224-SP Switch Plate Reader
D8225 Mini Mullion Reader
D8227 Insert Card Reader
D8301/W Series Low-profile Proximity Readers
D8302 Vandal-resistant Reader
D8303/W Series Mullion Proximity Readers
D8304/W Series Extended Range Proximity Readers
WP612 Series Waterproof Pass-through Readers
WP644 Series Waterproof Pass-through Readers

Communicators

SAFECOM Radio SC2104 Series Slave Communicators
SC3100 Series Data Transfer Radio Communicators
SC4000 Series Full Data Transfer Radio Communicator

Technical Specifications

Enclosures

D8103 Universal
D8108A Attack-Resistant
D8109 Fire

Communications

SDI Bus A (+): 9 VDC, 4572 m (15,000 ft)
SDI Bus B (-): 9 VDC, 4572 m (15,000 ft)
Telephone Connection: One telephone line (D928 Dual Phone Line Module required for two telephone lines)

Environmental Considerations

Relative Humidity: 5% to 85% at +30°C (+86°F), non-condensing
Temperature (Operating): 0°C to +50°C (+32°F to +120°F)

Power Requirements

Current Draw (Minimum): 225 mA
Current Draw (Maximum): 300 mA
Output (Alarm): 2 A at 12 VDC
Output (Auxiliary, Continuous Power, and Switched Auxiliary combined): 1.4 A at 10.2 VDC to 13.9 VDC
Voltage (Operating): 12 VDC
Voltage (AC): 16.5 VAC, 40 VA plug-in transformer (D1640)
Standby Power: Up to 2 x 12 VDC, 7 Ah sealed lead acid rechargeable batteries; Up to 2 x 12 VDC, 18 Ah sealed lead acid rechargeable batteries

Specifications Summary

Specification	Value
Areas	8
Card Readers (Doors)	8
Credentials (Tokens)	996
Custom Functions	16
Programmable Relay Outputs	131
Events	Up to 1,000
Passcode Users	249, plus 1 service passcode
Parallel Printers	3
Points	246 (8 on-board, up to 238 off-board)
RF Points	238
SKEDs	64

Ordering Information

Control Panel

Product	Model Number
D9412GV2 Control Panel	D9412GV2
D9412GV2 Attack-Resistant Kit	D9412GV2-A
D9412GV2 Fire and Burglar Kit	D9412GV2-B
D9412GV2 Commercial Burglar Kit	D9412GV2-C

Hardware Accessories

Hardware Accessory	Part Number
Lock and Key Set	D101
Tamper Switch	D110
Dual Battery Harness	D122
Dual Battery Harness with Long Leads	D122L
Standby Battery (12 V, 7 Ah)	D126
Mounting Bracket	D137
Mounting Bracket, Right Angle	D138
Dual Phone Line Switcher	D928
Battery (12 V, 18 Ah)	D1218
Battery (12 V, 24 Ah)	D1224
Battery (12 V, 38 Ah)	D1238
Battery (12 V, 4 Ah)	D1240
Transformer	D1640
Enclosure	D8103
Attack Resistant Enclosure	D8108A
Fire Enclosure	D8109
Mounting Skirt	D9002-5
Plug-In Relay	D136

Software Options

Software Option	Part Number
RPS D5500C-LPT Kit	D5500C-LPT
RPS D5500C-USB Kit	D5500C-USB